About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural jobs here run 6 to 12 inches depending on how much grade you're correcting. Measure the low area's length and width, decide your target depth, and order in cubic yards rather than guessing by the truckload. If you're backfilling around a pool or foundation, measure the actual void, not just the surface footprint.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Beavercreek Fill Dirt Delivery

Beavercreek Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural jobs here run 6 to 12 inches depending on how much grade you're correcting. Measure the low area's length and width, decide your target depth, and order in cubic yards rather than guessing by the truckload. If you're backfilling around a pool or foundation, measure the actual void, not just the surface footprint.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Beavercreek Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Fill dirt does the structural work, but it isn't a growing medium, so most Beavercreek jobs cap it with a few inches of topsoil before seeding or sodding. If you're leveling a low spot near a patio or driveway, a layer of gravel underneath can help with drainage before the fill goes on top. Mulch comes in later, once the grade is set and beds are planted.

Mulch Mound Pro Tip

Fill dirt in Beavercreek's silt loam clay-heavy pockets needs to go down in lifts, not one big dump. Spread 6 to 8 inches, compact it with a plate compactor or hand tamper, then repeat. Skipping compaction is the single biggest reason people see sinking or cracking around a pool deck or foundation a year or two later. It costs an afternoon now versus a regrade job later.

Mulch Mound Pro Tip

A common mistake is treating fill dirt like topsoil and planting straight into it. It's subsoil, screened of debris but stripped of the organic matter and microbial life that plants need. Cap any area that will grow grass or landscaping with 4 to 6 inches of real topsoil once the fill is compacted and graded to your target elevation.

Mulch Mound Pro Tip

If you're filling a large low area, order slightly more than your calculated volume, settling and minor grading adjustments almost always eat into your margin. It's cheaper to have a small leftover pile for future touch ups than to schedule a second delivery for a partial cubic yard. Keep any extra covered and dry if you won't use it right away.

Grading and Filling in Beavercreek

Beavercreek's silt loam compacts differently than sandy or clay soils, it holds moisture and can shift if fill isn't packed properly underneath it. With an elevation around 873 feet and no major drainage slope working in your favor in most subdivisions near The Greene, low areas tend to stay wet into spring. Fill dirt raised in proper lifts gives water somewhere to go instead of pooling against a foundation. This is why we see so many pool backfill and patio base jobs in this area before anything gets planted on top.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I plant grass directly in fill dirt in my Beavercreek yard?

No, fill dirt is subsoil meant for structural grading, not growing. It lacks the organic matter and nutrients that silt loam topsoil has. Cap it with 4 to 6 inches of topsoil before seeding or laying sod, otherwise grass will struggle or fail to establish even with regular watering and fertilizer.

Answer

How many cubic yards do I need to raise a low spot in my yard?

One cubic yard covers about 54 square feet at 6 inches deep. Measure your low area's length times width, decide your target depth between 6 and 12 inches, then calculate volume and divide by 54 for a 6 inch baseline. For deeper fills, adjust proportionally and round up slightly for compaction loss.

Answer

Do I need to compact fill dirt before building on it?

Yes, always. Fill dirt should go down in 6 to 8 inch lifts, each one compacted before adding the next. Skipping this step is why ground settles unevenly for years, especially in areas with Beavercreek's silt loam base. Compaction matters most under patios, driveways, and pool decks where uneven settling causes visible problems.

Answer

Where will the truck place the fill dirt on my property?

We place the load at the driveway or yard access point you specify at checkout. Make sure the path is at least 10 to 12 feet wide and clear of low branches, parked cars, or fences the truck can't clear. If your access is tight, mention it when scheduling so we can plan accordingly.

Answer

What's the difference between fill dirt and topsoil for my project?

Fill dirt is subsoil used for structural grading, raising low spots, and backfill, it compacts well but won't support plant growth. Topsoil has organic matter for planting and growing. Most Beavercreek projects use fill dirt to build up grade first, then cap it with topsoil wherever grass or landscaping needs to grow.

More delivery around Beavercreek, Ohio

All Beavercreek, Ohio landscape supply