• Beavercreek OH Sand Delivery - Mulch Mound
  • Beavercreek OH Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a typical paver patio joint job or mortar mixing project usually only needs a fraction of a yard. For pool base work or thicker beds up to 2 inches, figure closer to 160 square feet per yard. Measure your square footage first, then work backward from there since this material is sold by the cubic yard and small overages are easy to avoid.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Beavercreek Sand Delivery

Beavercreek Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a typical paver patio joint job or mortar mixing project usually only needs a fraction of a yard. For pool base work or thicker beds up to 2 inches, figure closer to 160 square feet per yard. Measure your square footage first, then work backward from there since this material is sold by the cubic yard and small overages are easy to avoid.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Beavercreek Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Paver projects usually call for edge restraint and a compacted base material underneath before this sand goes down for joints or bedding. If you're mixing mortar, you'll want cement on hand as well. Some Beavercreek customers are moving to clean chip stone for paver bedding since it doesn't pump the way sand can under freeze thaw cycles, worth asking about if that's your project.

Beavercreek Soil Delivery
Beavercreek Mulch Delivery
Mulch Mound Pro Tip

For mortar mixing, this finely screened sand is what keeps the mix workable long enough to set pavers or block before it stiffens up. Concrete sand is coarser and will make your mortar gritty and harder to trowel smooth. If you're doing joint work on a patio near The Greene or anywhere else in town, stick with this finer grade rather than substituting whatever's cheaper at the yard.

Mulch Mound Pro Tip

A common mistake is assuming sand joints will stay put through a Beavercreek winter. With freeze thaw cycles running from late October to late April, sand in paver joints tends to migrate and needs topping off most springs. Budget for a small maintenance pass each year rather than expecting a one time install to hold indefinitely, especially on walkways that see foot traffic all winter.

Mulch Mound Pro Tip

If you're doing paver bedding rather than joint filling, ask about clean chip stone instead of sand. It's become the more common choice locally because it doesn't pump up through joints the way sand can after repeated freeze thaw cycles. Save the mason sand for actual joint work and mortar mixing where its fine, uniform texture is what you actually need.

Working With Sand in Beavercreek

Beavercreek sits on silt loam, which drains fine on its own but does nothing for you once you're setting pavers or mixing mortar on a job site. This sand gives you the uniform, workable base those jobs need regardless of what the native soil underneath is doing. With zone 6b freeze thaw cycles running from late October into late April, joint sand and bedding material get pushed around every winter, so a properly screened, uniform product matters more here than in milder climates. Most calls we get for this are tied to patios and walkway projects going in during the warmer months.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What's the difference between this and regular construction sand?

This is washed and finely screened, much finer and more uniform than concrete sand. That uniformity is what makes mortar workable and lets it pack tightly into paver joints. Concrete sand is coarser and meant for structural mixes, not finish work like joints or mortar for block and brick.

Answer

How many cubic yards do I need for a paver patio?

For joint filling at about 1 inch depth, one cubic yard covers roughly 324 square feet, so most patios need well under a full yard. Measure your total square footage first, then order based on that, since overbuying shallow-depth material like this is easy to do without careful measuring.

Answer

When's the best time to install paver joints in Beavercreek?

Spring through fall is when most hardscape work happens here, once the ground has thawed past the April 25 last frost date. Installing before the first frost in mid October gives the joints time to settle before winter freeze thaw cycles start pushing sand around.

Answer

Will the delivery truck be able to reach my backyard project?

Our trucks place material at the driveway or staging area you designate, they generally can't drive across lawns or through tight side yard gates. If your project area is in the backyard, plan on moving material from the drop point yourself or have a path in mind, and let us know about any access issues before delivery day.

Answer

Should I use this sand or chip stone under my pavers?

For actual joint filling and mortar mixing, this sand is the right call because of its fine, uniform texture. For bedding under the pavers themselves, many Beavercreek customers are switching to clean chip stone since it resists pumping up through joints during winter freeze thaw, something sand is prone to over time.

More delivery around Beavercreek, Ohio

All Beavercreek, Ohio landscape supply