I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most paver joint or bedding work only needs 1 to 2 inches. For a typical patio project in Bellefontaine, figure your square footage and depth, then order in full cubic yard increments since partial yards are hard to estimate accurately on site.
What is a Yard?
What is a Yard?
FAQs
FAQs
Bellefontaine Sand Delivery
Bellefontaine Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Sand Do I Need?
How Much Sand Do I Need?
One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most paver joint or bedding work only needs 1 to 2 inches. For a typical patio project in Bellefontaine, figure your square footage and depth, then order in full cubic yard increments since partial yards are hard to estimate accurately on site.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Most jobs using mason sand also need paver base gravel or clean chip stone underneath it, since chip stone has largely replaced sand as a bedding layer because it does not pump out over time. If you are mixing mortar for a stone wall near Campbell Hill, pair this with masonry cement rather than sand alone.
Service area
Areas we deliver sand in Bellefontaine, Ohio
Mulch Mound Pro Tip
Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar but not for structural bedding under heavy pavers. If you are setting pavers that will see vehicle weight or foot traffic near a slope like the ones around Campbell Hill, use chip stone underneath instead of sand, since sand bedding tends to shift and pump moisture up through the joints over freeze thaw cycles.
Mulch Mound Pro Tip
Bellefontaine gets real freeze thaw cycles given the elevation up around 1250 feet, and sand joints that were packed loose in fall often need topping off by spring. Sweep in a bit more mason sand each April before your first mow, and avoid installing paver joints right before a hard freeze since damp sand can heave.
Mulch Mound Pro Tip
If your project also needs a base layer, order chip stone and mason sand together rather than in separate deliveries, since most hardscape jobs use both. It saves a second delivery fee and lets you finish the base one day and set pavers the next without waiting on material.
Working With Sand in Bellefontaine
Bellefontaine sits on silt loam soil, which holds moisture and does not drain the way sand does, so this material is really a job sand rather than a landscape amendment here. It shows up most on hardscape projects, mortar mixes, and paver joints around Campbell Hill area homes where people are building patios and walkways into the fall before frost hits in mid October. Because the growing season is short at zone 6a, most sand orders cluster in the spring and early fall build windows rather than mid summer. It is not something you till into a garden bed here, it is a construction material.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.