About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

One cubic yard of our fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and size the order from there rather than guessing. Because it is sold and delivered by the cubic yard, it pays to measure twice, this is not a material you want to run short on mid-project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Bridgeport Fill Dirt Delivery

Bridgeport Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were o...

One cubic yard of our fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and size the order from there rather than guessing. Because it is sold and delivered by the cubic yard, it pays to measure twice, this is not a material you want to run short on mid-project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Bridgeport Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs around Bridgeport finish with a few inches of screened topsoil capping the fill so grass or plantings actually have something to root into. If the area will see foot traffic or drainage flow, a layer of crushed stone underneath the fill can help keep things from resettling. We deliver these as separate loads so each layer goes down clean and compacted in order.

Mulch Mound Pro Tip

Do not dump fill dirt in one deep pile and expect it to settle on its own. Place it in lifts of 6 to 8 inches and compact each lift with a plate compactor or hand tamper before adding the next. Skipping this step is the number one reason Bridgeport homeowners call us back a year later asking why their yard sank near the foundation. It takes longer up front but it is the only way the grade holds through a New England winter.

Mulch Mound Pro Tip

Fill dirt is not a growing medium, and Bridgeport's sandy loam topsoil will not naturally develop on top of raw subsoil. Always cap finished fill with 4 to 6 inches of real topsoil before seeding or sodding. Skip this and you will get thin, patchy grass no matter how much fertilizer you throw at it, because the roots simply cannot establish in compacted subsoil alone.

Mulch Mound Pro Tip

If your project spans both structural fill and finish grading, order the fill dirt and topsoil as separate deliveries rather than one mixed load. It costs nothing extra to keep them separate, and it means you are not paying to compact material that should have stayed loose on top. This separation also makes it easier to hit exact depths on each layer instead of guessing at a blended pile.

Grading and Filling in Bridgeport

Bridgeport sits at just 10 feet of elevation with sandy loam soil that drains fast on top but can still leave low areas holding water after a storm off the Sound. A lot of the calls we get here are for backfill around pool installs, foundation grading on older homes near downtown, and yards that need a few inches of lift before new topsoil and sod go in. Fill dirt is the structural layer under all of that, it is not meant to support plant roots, it is meant to stay put. In a zone 7a climate with a real frost season, uncompacted fill will heave and settle over the winter, so getting the compaction right matters more here than in warmer, drier regions.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Bridgeport?

Yes, fill dirt is the right material for raising low grade across a yard, especially in low-lying areas near the harbor that hold water. Place it in compacted 6 to 8 inch lifts to your target depth, then cap with topsoil before seeding. Do not skip compaction or the yard will settle unevenly over the following seasons.

Answer

How many cubic yards of fill dirt do I need for a 500 square foot area?

At a 6 inch depth, one cubic yard covers about 54 square feet, so 500 square feet needs roughly 9 to 10 cubic yards. If you are going deeper, say 12 inches, plan on close to double that. Measure your actual area and target depth before ordering since these numbers scale directly.

Answer

When is the best time to bring in fill dirt before frost hits?

With Bridgeport's first frost typically around October 25, aim to finish placing and compacting fill dirt at least a few weeks before that so it has time to settle before the ground freezes. Fill dirt itself is not seasonal work, it is driven by your project timeline, but avoid compacting into already-frozen or saturated ground.

Answer

Where will the fill dirt be dropped and do I need a special access point?

We place the load wherever your driveway or curb access allows the truck to reach safely, just let us know the drop spot when you schedule. If your site has tight access, narrow alleys, or steep grade changes common in some of Bridgeport's older neighborhoods, mention that ahead of time so we can plan the delivery accordingly.

Answer

Is fill dirt the same as topsoil, and can I plant directly in it?

No, fill dirt is subsoil screened of debris, meant purely as a structural base, it lacks the organic content and nutrients topsoil has. You should not plant directly into it, always cap fill dirt with several inches of topsoil first. Using fill dirt alone for planting beds will give you poor, compacted growing conditions.

More delivery around Bridgeport, Connecticut

All Bridgeport, Connecticut landscape supply