About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

At a 1 inch depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet. For mortar mixing or pool base work, depth depends more on the project spec than a blanket rule, so measure your area first and work backward from the 1 inch coverage figure. Most Brookfield patio and paver jobs run somewhere between half a yard and two yards depending on square footage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

Brookfield Sand Delivery

Brookfield Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

At a 1 inch depth, one cubic yard covers about 324 square feet, and at 2 inches that drops to roughly 162 square feet. For mortar mixing or pool base work, depth depends more on the project spec than a blanket rule, so measure your area first and work backward from the 1 inch coverage figure. Most Brookfield patio and paver jobs run somewhere between half a yard and two yards depending on square footage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Brookfield Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base gravel and edge restraints on most patio and walkway jobs, and with polymeric jointing sand where joints need to resist weeds and washout. If you are pouring a pool base or mixing mortar, having crushed stone on hand for the sub base keeps the whole job moving without a second delivery.

Map of the sand delivery area around Brookfield, Wisconsin

Service area

Areas we deliver sand in Brookfield, Wisconsin

Mulch Mound Pro Tip

For paver bedding, many Brookfield contractors have shifted from mason sand to clean chip stone because chip stone does not pump up through joints the way fine sand can over freeze thaw cycles. If you are still using sand for bedding, keep it dry before screeding and compact in thin lifts, since damp sand clumps unevenly under a screed bar and leaves low spots that show up after the first hard rain.

Mulch Mound Pro Tip

Sand jobs in Brookfield are seasonal for a reason, ground temperatures below freezing make it nearly impossible to properly bed pavers or set mortar. Plan hardscape work for after the last frost around May 7 and wrap up before the ground starts hardening near mid October. Starting a mortar job too early in spring often means fighting moisture in a sand pile that never fully dried out over winter.

Mulch Mound Pro Tip

If your project needs both mortar sand and a base material like crushed stone, order them together for the same delivery window rather than staggering separate trips. It keeps the job site organized and means you are not waiting on a second load mid project, which matters most during the busy spring and fall stretch when delivery schedules fill up faster.

Working With Sand in Brookfield

Brookfield sits on clay loam that drains slowly, which is exactly why sand shows up in so many local hardscape and drainage projects. It is not a soil amendment here, it is a building material, used to bed pavers on patios, set mortar joints on brick and stone, and line pool bases. With clay loam underneath, contractors often use sand as a leveling layer to keep water from pooling against a paver base or foundation. Hardscape season here runs spring through fall, roughly between the last frost in May and the first frost in October.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, what we deliver is washed and finely screened natural sand, which is what most people mean when they say mason sand. It is finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and clean paver joints.

Answer

How many cubic yards do I need for a paver patio in Brookfield?

One cubic yard covers about 324 square feet at a 1 inch depth, or about 162 square feet at 2 inches. Measure your patio area in square feet and divide by the coverage figure that matches your planned depth to get your cubic yard total.

Answer

When is the best time to schedule a sand delivery here?

Most hardscape work happens between the last frost around May 7 and the first frost around October 14, since frozen or waterlogged ground makes proper bedding and mortar work difficult. Spring and fall are the busiest stretches, so ordering a bit ahead of your project date helps.

Answer

Where will the sand be placed on delivery day?

You choose the drop location at checkout, typically a driveway or curb spot with enough clearance for the truck. Have the area cleared beforehand, and if you want to protect a paved driveway, put down plywood or a tarp before the load arrives.

Answer

Should I use sand or chip stone for paver bedding?

Many contractors in this area have moved toward clean chip stone for paver bedding because it does not pump or shift through joints the way fine sand can under freeze thaw cycles. Sand still makes sense for mortar mixing, paver joint filling, and pool bases where a finer, uniform grain is needed.

More delivery around Brookfield, Wisconsin

All Brookfield, Wisconsin landscape supply