• Coral Springs FL Sand Delivery - Mulch Mound
  • Coral Springs FL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

At a 1 inch install depth, one cubic yard covers about 324 square feet, so a small paver joint job or pool base patch might only need a fraction of a yard while a full patio bedding layer at 2 inches will use closer to double that per square foot. Since this material is sold by the cubic yard, measure your square footage first and work backward from the 324 square foot figure at 1 inch. Round up slightly for waste on joint sweeping and mortar batching, both of which lose material to spillage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Coral Springs Sand Delivery

Coral Springs Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

At a 1 inch install depth, one cubic yard covers about 324 square feet, so a small paver joint job or pool base patch might only need a fraction of a yard while a full patio bedding layer at 2 inches will use closer to double that per square foot. Since this material is sold by the cubic yard, measure your square footage first and work backward from the 324 square foot figure at 1 inch. Round up slightly for waste on joint sweeping and mortar batching, both of which lose material to spillage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Coral Springs Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Most hardscape jobs pair this sand with paver base stone or crushed limestone underneath, and increasingly with clean chip stone instead of sand for the actual bedding layer, since chip stone does not pump out from under pavers the way sand can. If you are mixing mortar on site, plan for cement and a mixing surface delivered around the same time. Pool base projects often pair this sand with a compacted limestone sub base first.

Coral Springs Soil Delivery
Coral Springs Mulch Delivery
Map of the sand delivery area around Coral Springs, Florida

Service area

Areas we deliver sand in Coral Springs, Florida

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniformly graded than concrete sand, which is exactly why it mixes into workable mortar instead of a gritty, uneven paste. If you are hand mixing mortar in Coral Springs heat, keep the pile shaded and slightly damp before use, dry sand absorbs water unevenly in direct sun and makes the mix set inconsistently in your wheelbarrow before you can trowel it.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding out of habit. It works, but it is being phased out in favor of clean chip stone because sand bedding can migrate or pump out under pavers over time, especially with heavy rain events common in South Florida. If your project is paver bedding rather than mortar or joint filling, ask about chip stone instead.

Mulch Mound Pro Tip

Order mason sand and any base or bedding stone for the same delivery window when possible, it saves a second driveway delivery and lets your crew sequence base compaction, then sand, then pavers without waiting days between deliveries. For pool deck jobs, coordinate the sand delivery with your limestone sub base delivery so both materials are on site before the crew starts.

Working With Sand in Coral Springs

Coral Springs sits on sandy limestone at 13 feet of elevation, so drainage is rarely the problem, consistency is. Native soil here has too much variation in grain size and shell content to trust for mortar mixing or paver joint work. Mason sand gives masons and hardscape crews a predictable, fine, uniform product that behaves the same way every time it is mixed or swept into joints. With hardscape season running spring through fall here, most orders come in ahead of pool deck and paver projects rather than for general fill.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand from a hardware store bag?

No. Mason sand is washed and finely screened for consistency, which is what makes mortar workable and paver joints fill evenly. Bagged all purpose sand often has more variation in grain size and can contain debris, which shows up as weak spots in mortar or uneven joint fill on paver projects.

Answer

How many cubic yards do I need for a pool deck joint fill?

At 1 inch of coverage, one cubic yard covers about 324 square feet, but joint filling uses far less material per square foot than a full bedding layer. Measure your deck's total square footage, then estimate based on joint width and spacing, most pool decks need well under a full yard for joints alone.

Answer

When is the best time to schedule a sand delivery for a hardscape project?

Hardscape work in Coral Springs runs heaviest from spring through fall, so scheduling early in that window avoids the rush. Sand itself has no seasonal install restriction, it can be delivered and used any time of year, but pairing delivery with your contractor's start date avoids sand sitting exposed to rain for weeks.

Answer

Where will the sand be placed on my property during delivery?

We place the load at the driveway, curb, or other accessible spot you specify at checkout. Make sure there is clear truck access and a flat surface, since mason sand delivered loose needs a stable spot so it does not wash into landscaping or storm drains before use.

Answer

Should I use mason sand or chip stone for paver bedding?

Chip stone is increasingly preferred for paver bedding because it does not pump out from under pavers the way sand can over time, especially with heavy seasonal rain. Mason sand remains the right choice for mortar mixing and paver joint filling, where its fine, uniform grain is an advantage rather than a liability.

More delivery around Coral Springs, Florida

All Coral Springs, Florida landscape supply