• Danville VA Sand Delivery - Mulch Mound
  • Danville VA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a small paver patio or pool deck base usually runs somewhere between half a yard and two yards depending on footprint. Mortar mixing and joint filling use far less volume per square foot, so those orders are typically sized around batch counts rather than coverage area. Measure your project footprint first, then decide if you are spreading a thin bedding layer or mixing it into batches.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Danville Sand Delivery

Danville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a small paver patio or pool deck base usually runs somewhere between half a yard and two yards depending on footprint. Mortar mixing and joint filling use far less volume per square foot, so those orders are typically sized around batch counts rather than coverage area. Measure your project footprint first, then decide if you are spreading a thin bedding layer or mixing it into batches.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Danville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with paver base stone or clean chip stone underneath it, and with mortar mix or polymeric jointing sand on top of it. Jobs near older Danville brick work often call for both sand for the mortar and a matching paver base material for the walkway or patio tying into it. If your project includes a poured footing or slab, a load of crushed stone alongside the sand covers most of what a mixed hardscape job needs.

Danville Soil Delivery
Danville Mulch Delivery
Map of the sand delivery area around Danville, Virginia

Service area

Areas we deliver sand in Danville, Virginia

See All Locations
Mulch Mound Pro Tip

If you are bedding pavers on Danville's red clay, do not assume sand alone will stay put. Clay holds moisture underneath the bedding layer longer than sandy soils do, which can cause pumping and shifting over a wet winter. Many local installers are switching to a clean chip stone bedding layer instead of sand for exactly this reason, reserving mason sand for joint filling and mortar work where its fine, uniform grain actually matters.

Mulch Mound Pro Tip

A common mistake is ordering mason sand for paver bedding out of habit rather than function. Mason sand is meant for mortar mixing and joint work because its fine, consistent particle size makes the mix workable. For structural bedding under pavers, a coarser material resists shifting better over time and drains through Danville's clay subsoil more reliably.

Mulch Mound Pro Tip

Mortar and pointing jobs run through less sand per square foot than people expect, so smaller orders are common for masonry repair versus new paver installs. If your project mixes mortar work and a paver patio, order the mason sand for the mortar batches separately from your base and bedding material, since they serve different jobs even on the same site.

Working With Sand in Danville

Danville sits on red clay that does not drain and does not play nice with poured footings or mortar mixes, so a lot of masons here keep a clean sand on hand to correct the mix rather than fight the clay directly. With Riverwalk Trail area homes and older brick construction common around town, repointing and paver patio work stay steady through the warmer months. The clay base under most yards also means bedding sand for pavers has to be handled carefully, since it holds water longer than a sandy loam would. Fine washed sand keeps mortar joints tight and workable even when the humidity swings during a Danville summer.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as the mason sand used for mortar mixing?

Yes, this is washed and finely screened natural sand, sometimes called mason sand, sized specifically for mortar mixing and paver joints. It is finer and more uniform than concrete sand, which is what keeps a mortar mix workable under the trowel.

Answer

How much sand do I need for a paver patio in Danville?

One cubic yard covers about 324 square feet at a 1 inch depth, so a 300 square foot patio bedding layer needs roughly one yard. If you are also filling joints or mixing mortar, add extra volume separately since those uses consume less material per square foot than a full bedding layer.

Answer

When is the best time of year to schedule a hardscape sand delivery here?

Spring through fall is when most hardscape work happens in Danville, once the ground has fully thawed after the last frost around April 21 and before the first frost in late October slows curing times. Mortar cures more reliably in the warmer, more stable months in between.

Answer

Can the delivery truck reach my backyard or does it have to stay on the driveway?

Trucks generally place material as close to your project as access allows, but tight gates, low branches, or soft ground can limit where a load lands. Note any access restrictions in your delivery instructions at checkout so the driver knows where to place it before arriving.

Answer

Should I use this sand or crushed stone for bedding pavers?

For paver bedding, many installers are moving toward clean chip stone instead of sand because stone does not pump or shift the way sand can, especially over clay subsoil like Danville has. Mason sand is still the right choice for mortar mixing and filling paver joints where its fine, uniform texture matters most.

More delivery around Danville, Virginia

All Danville, Virginia landscape supply