• Dyersburg TN Sand Delivery - Mulch Mound
  • Dyersburg TN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard of mason sand covers roughly 324 square feet, and most mortar or bedding applications only need 1 to 2 inches. So a small patio joint job might only need a fraction of a yard, while a paver base for a driveway apron could run 2 to 3 yards. Measure your square footage first, then work backward from the depth you actually need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Dyersburg Sand Delivery

Dyersburg Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard of mason sand covers roughly 324 square feet, and most mortar or bedding applications only need 1 to 2 inches. So a small patio joint job might only need a fraction of a yard, while a paver base for a driveway apron could run 2 to 3 yards. Measure your square footage first, then work backward from the depth you actually need.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Dyersburg Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most jobs using mason sand also need paver base stone or crushed gravel underneath it for real structural support, since sand alone will not carry vehicle or heavy foot traffic. If you are laying pavers, a lot of installers are now using clean chip stone instead of sand for the bedding layer since it does not pump out over time. We can deliver either alongside your sand order.

Dyersburg Soil Delivery
Dyersburg Mulch Delivery
Map of the sand delivery area around Dyersburg, Tennessee

Service area

Areas we deliver sand in Dyersburg, Tennessee

See All Locations
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar and not so well for structural bedding. If you are mixing mortar for brick or block work, do not substitute concrete sand thinking it is close enough, the grain size affects workability and bond strength. Keep it dry and covered before use if rain is forecast, since Dyersburg gets regular spring storms that can turn a sand pile into a soggy mess overnight.

Mulch Mound Pro Tip

A common mistake is using mason sand as the main bedding layer under pavers, expecting it to stay put. Fine sand tends to migrate and wash out over time, especially with the amount of rain this area gets between last and first frost. Many local installers have shifted to clean chip stone for paver bedding since it locks together and does not pump under traffic. Save the mason sand for joints and mortar work where its fine texture is actually the advantage.

Mulch Mound Pro Tip

If your project needs both mason sand and a base material like crushed stone, ordering them together in one delivery saves a second truck trip and a second cleanup. Since silt loam compacts differently than sandier soils, plan your base depth generously before adding the sand layer on top, shortcuts on the base show up later as settling. This matters more on driveway or patio jobs than small joint repairs.

Working With Sand in Dyersburg

Dyersburg sits on silt loam, soil that holds moisture and gets soft after the spring rains that roll through before the April 5 last frost. That makes a stable, well drained base layer matter more here than in sandier ground further west. Mason sand does not replace the base, but it fills joints and beds mortar in a way that resists shifting when the ground swells and dries through the season. Most of the demand we see is spring through fall, which lines up with when hardscape and masonry crews here are actually working.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as what I need for paver joints in Dyersburg?

Yes, mason sand works well for sweeping into paver joints because it is fine and uniform enough to settle in tightly. It is also the standard choice for mortar mixing on brick or block projects. If you are bedding the pavers themselves rather than filling joints, many installers here now prefer chip stone since it resists washout better in our wetter months.

Answer

How many cubic yards of sand do I need for a small patio project?

One cubic yard covers about 324 square feet at a 1 inch depth, so for a typical 200 to 300 square foot patio joint fill or mortar bed, a single yard usually covers it with some left over. Larger driveway or walkway projects at 2 inches deep will need roughly double that per square foot.

Answer

When is the best time to schedule a sand delivery for a masonry project?

Spring through fall is when most hardscape and masonry work happens here, after the last frost around April 5 and before the ground firms up ahead of the October 28 first frost. Sand itself has no seasonal install restriction, but working with mortar in freezing temperatures is not advisable, so plan around your local frost dates.

Answer

Where will the delivery truck place the sand load at my house?

The driver will place the load as close to your work area as the truck can safely access, usually a driveway or a flat spot near the curb. Because Dyersburg's silt loam soil gets soft and rutted when wet, a hard surface is preferred over a grass or dirt drop point, especially in spring.

Answer

Should I get mason sand or chip stone for my paver project?

It depends on what you are using it for. Mason sand is the right choice for mortar mixing and sweeping into paver joints, but for the actual bedding layer under pavers, chip stone is increasingly preferred locally because it locks in place and does not pump or wash out the way sand can over time.

More delivery around Dyersburg, Tennessee

All Dyersburg, Tennessee landscape supply