Ordered Dirt. Received Dirt. Would Buy Again.

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Read full review
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Read full review
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Complete Your Outdoor Project
Mason sand pairs naturally with paver base stone and edging on hardscape jobs, and with portland cement for anyone mixing their own mortar on site. If you are setting a paver patio, many crews around Elizabethtown are switching the bedding layer to clean chip stone since it does not pump moisture up through the joints the way sand can.
Service area
Areas we deliver sand in Elizabethtown, Kentucky
Mason sand for mortar wants to stay dry until you are ready to mix it, so tarp the pile if rain is forecast, especially given how often E-town gets spring showers rolling through. Wet sand throws off your water to cement ratio and weakens the mix. Keep the pile off bare dirt too, silt loam mixes into sand easily once it gets wet and that contamination shows up as weak, gritty mortar later.
A common mistake on paver jobs is using mason sand as the bedding layer under the pavers themselves instead of just in the joints. It is fine graded for joint packing but it shifts and pumps moisture under load over time. If you are laying a patio or walkway, use a proper paver base stone under the pavers and save the mason sand for sweeping into the joints afterward.
If you are running both a mortar job and a paver job on the same property, order your mason sand and your base stone together as one delivery instead of two separate trips. It saves a delivery charge and you can stage both piles in one spot near the work zone, which matters on smaller E-town lots where yard space is tight.
Working With Sand in Elizabethtown
E-town sits on silt loam, which drains slower than sandy soil and holds moisture longer after spring rain off Freeman Lake. That makes mason sand useful as a stable base layer under patios and walkways where the native soil would otherwise stay soft. It is also the standard choice for mortar mixing on brick and block work common around town, and for pool base leveling in backyards that need a firm, even surface before the season heats up.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.