About this fill dirt

Inorganic subsoil for filling holes, raising low ground, and backfill. Small rocks and bits of stick or root are normal in the mix, this is structural material and not a growing medium. Do not use it to level a lawn surface or fill flower beds, put topsoil over it for anything you want to plant. Place it in lifts and compact as you go.

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a 10 by 10 foot low spot needs roughly two yards at that depth, more if you are going deeper. Most foundation and pool backfill jobs run 6 to 12 inches, so figure your area, pick your depth, and size the order from there. It is sold and delivered by the cubic yard, so overestimating slightly is cheaper than a second trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Elmira Fill Dirt Delivery

Elmira Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Inorganic subsoil for filling holes, raising low ground, and backfill. Small rocks and bits of stick or root are normal in the mix, this is structural material and not a growing medium. Do not use it to level a lawn surface or fill flower beds, put topsoil over it for anything you want to plant. Place it in lifts and compact as you go.

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a 10 by 10 foot low spot needs roughly two yards at that depth, more if you are going deeper. Most foundation and pool backfill jobs run 6 to 12 inches, so figure your area, pick your depth, and size the order from there. It is sold and delivered by the cubic yard, so overestimating slightly is cheaper than a second trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Elmira Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a cap of topsoil once the grade is set, since fill dirt itself will not support grass or plantings. If you are backfilling near a foundation or pool wall, a load of crushed stone underneath for drainage is worth considering before the dirt goes in. Compaction equipment, even a hand tamper for small jobs, matters more than the dirt itself.

Map of the fill dirt delivery area around Elmira, New York

Service area

Areas we deliver fill dirt in Elmira, New York

Mulch Mound Pro Tip

Elmira's silt loam does not compact well when wet, and with the last frost often lingering into May, spring ground can stay saturated longer than it looks. Wait for the surface to firm up before you bring in fill, or you will be working dirt into mud instead of a stable base. Placing in 6 to 8 inch lifts and compacting each one before adding the next is the only way to avoid years of slow settling afterward.

Mulch Mound Pro Tip

The most common mistake we see is treating fill dirt like topsoil and trying to plant into it directly. It has no organic matter and often compacts too hard for roots to push through. Always cap finished fill with 4 to 6 inches of real topsoil before seeding or planting anything, even grass. Skipping this step means a lawn that never quite fills in over the fill area.

Mulch Mound Pro Tip

If you are backfilling around a foundation or an old pool, order enough fill to complete the whole area in one delivery rather than staggering loads, since remobilizing equipment and labor for a second small load costs more in time than the material itself. Combining your fill order with topsoil delivered the same week keeps the project moving without a gap where bare subsoil sits exposed to Elmira's fall rains.

Grading and Filling in Elmira

Elmira sits at 860 feet with silt loam soil that drains slowly and holds moisture, so low areas near foundations and old pool sites tend to stay soggy well past the May 10 frost date. Fill dirt gives you a structural base to raise that ground above the water table before anything else happens. Because it is not a growing medium, it is the right call for backfill and grade correction, not for beds or lawns. Cap it with topsoil once the grade is where you want it.

What Fill Dirt Is

Fill dirt is inorganic subsoil sold for volume and grade, not for growing. Small rocks and bits of stick or root are normal in the mix. It compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my backyard in Elmira?

Yes, fill dirt is the right material for raising low spots and correcting grade in a yard, especially in areas with silt loam soil that holds water. Place it in 6 to 8 inch lifts and compact each layer, then cap with topsoil if you plan to seed grass over it. It is not meant to be a final growing surface on its own.

Answer

How many cubic yards of fill dirt do I need for a pool backfill?

It depends on the gap size, but one cubic yard covers about 54 square feet at 6 inches deep, so a typical above ground pool removal backfilling a ring 3 feet wide around a 24 foot pool might need 8 to 12 yards. Measure the actual void depth first, since pool backfill often needs more than 6 inches.

Answer

When is the best time to have fill dirt delivered around Elmira?

Fill dirt work is project driven, not seasonal, but Elmira's silt loam compacts poorly when saturated, so avoid working it right after heavy spring rain or before the ground has thawed near the May 10 frost date. Late spring through fall, once the ground has firmed up, gives you the most workable compaction conditions.

Answer

Where will the fill dirt be placed on delivery day?

We place the load as close to your work area as your driveway or access point safely allows. Have at least 10 feet of clear width available and know where you want the pile before the truck arrives, since fill dirt loads are heavy and not easily moved by hand once dropped.

Answer

Should I get fill dirt or topsoil for my project?

If you are raising ground, backfilling a foundation, or building up a low area, fill dirt is the right structural material since it compacts and holds shape. Topsoil comes after, as a cap where grass, shrubs, or garden beds need to grow. Using topsoil alone for structural fill wastes money and will not compact the same way.

More delivery around Elmira, New York

All Elmira, New York landscape supply