I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this fill dirt
Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Fill Dirt Do I Need?
How Much Fill Dirt Do I Need?
One cubic yard of this fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how low the area sits. Measure the low spot or backfill zone in square feet, decide your depth, and order in full cubic yards since this material is sold and delivered that way. For deeper fills, plan on doing it in lifts rather than one thick pour.
What is a Yard?
What is a Yard?
FAQs
FAQs
Enid Fill Dirt Delivery
Enid Fill Dirt Delivery
Regular price
$38.00
per
Yard
Regular price
Sale price
$38.00
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local fill dirt, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your fill dirt isn't the quantity or quality you ordered, we'll make it right.
About this fill dirt
Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Fill Dirt Do I Need?
How Much Fill Dirt Do I Need?
One cubic yard of this fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches deep depending on how low the area sits. Measure the low spot or backfill zone in square feet, decide your depth, and order in full cubic yards since this material is sold and delivered that way. For deeper fills, plan on doing it in lifts rather than one thick pour.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Most fill dirt jobs in Enid end with a layer of topsoil on top once the grade is set, since fill dirt itself is not meant to grow anything. If the area needs drainage help before you backfill, a bed of gravel underneath the fill can keep water from pooling against a foundation. Mulch comes later, once topsoil and any planting are in.
Mulch Mound Pro Tip
Enid's silt loam compacts fine when it is workable, but too wet or bone dry it either smears into a slick layer or refuses to bind at all. Aim to compact fill in 6 to 8 inch lifts when the soil has a bit of moisture in it, not right after a heavy rain and not during a dry August stretch. A hand tamper works for small areas, but anything over a few yards is worth renting a plate compactor for.
Mulch Mound Pro Tip
The most common mistake we see is people dumping fill dirt in one thick layer and calling it done. Uncompacted fill keeps settling for months or years, which shows up later as a sunken patch near a foundation or a low spot that reappears after every rain. Compact each lift before adding the next one, even if it feels like an extra step you could skip.
Mulch Mound Pro Tip
If your project needs both structural fill and finished topsoil, order them as separate deliveries rather than trying to blend one material to do both jobs. Fill dirt is priced and handled as subsoil, cheaper to move in bulk, while topsoil costs more because it is meant to grow things. Keeping them separate on the job also makes it easier to cap the fill cleanly once it is compacted.
Grading and Filling in Enid
Enid sits on silt loam, which holds water longer than sandy ground and tends to shift and settle if you build on it without compacting properly. A lot of the low-ground and backfill jobs we see around Government Springs Park and older Enid neighborhoods come from that same silt loam settling over decades near foundations and drainage paths. Fill dirt gives you a stable structural base to correct that, but it has to go in compacted lifts here, not dumped and left, or the silt loam underneath will keep working against you. Cap it with topsoil once the grade is where you want it, especially before Enid's spring green-up in April.
What Clean Fill Is
Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.
Fill Dirt vs Topsoil
Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.
Compact in Lifts
Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.