• Hicksville NY Sand Delivery - Mulch Mound
  • Hicksville NY Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most installs run 1 to 2 inches depending on whether you are setting joints, mixing mortar, or building a pool base. For joint sand on a paver patio you are usually fine with a thin skim, but mortar mixing and pool base work can eat more volume than people expect. Measure your square footage first and work backward from there before you order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Hicksville Sand Delivery

Hicksville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most installs run 1 to 2 inches depending on whether you are setting joints, mixing mortar, or building a pool base. For joint sand on a paver patio you are usually fine with a thin skim, but mortar mixing and pool base work can eat more volume than people expect. Measure your square footage first and work backward from there before you order.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Hicksville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most paver jobs in Hicksville pair this sand with a compacted base layer of crushed stone underneath, and some crews now use chip stone instead of sand for the actual bedding layer. If you are mixing mortar for a brick walkway or retaining wall cap, you will also want cement and any masonry sealer on hand before the load arrives.

Hicksville Soil Delivery
Hicksville Mulch Delivery
Mulch Mound Pro Tip

For paver joint work, sweep this sand in dry and compact it in stages rather than all at once, especially if you are working near the coast where humidity swings can cause it to clump. In Hicksville's climate, a light misting after each sweep pass helps it settle into the joints without bridging, which keeps the joints tight through freeze thaw cycles that hit this area every winter.

Mulch Mound Pro Tip

A common mistake on mortar jobs here is mixing sand that is still damp from an overnight delivery without adjusting your water ratio. Sandy loam sites in Hicksville drain fast, so a pile left uncovered can still hold moisture from dew even on a dry day. Always check moisture content before you start mixing, or you will end up with mortar that is too wet to hold a joint line.

Mulch Mound Pro Tip

If you are doing a large paver project, consider whether you actually need this sand for bedding or just for joints, since many installers here have moved to chip stone for the base layer and reserve this material only for sweeping into joints. That split can cut your order size down and keep the finer material for the job it does best.

Working With Sand in Hicksville

Hicksville sits on sandy loam already, so drainage is rarely the issue, it is more about getting a consistent, workable material for the actual build. Masons here use it to mix mortar for brick and block work, and hardscapers use it in paver joints on the patios and walkways common in this area. With a growing zone of 7b and a first frost around November 1, most of this work happens spring through fall, and you want the sand on site and dry before cold weather sets in. Some crews still bed pavers in it, though a lot of installers around here have shifted to chip stone for that step since it locks in better and does not pump up through the joints.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, which is what people in some regions call mason sand. It is finer and more uniform than concrete sand, which is why it works well for mortar mixing and paver joints where you need a smooth, workable material rather than a coarse fill sand.

Answer

How much sand do I need for a patio's worth of paver joints?

One cubic yard covers roughly 324 square feet at a 1 inch depth, but joint sweeping uses far less than a full inch across the whole patio since it only fills the gaps. Measure your patio square footage, then estimate based on joint width, most residential patios in Hicksville use well under a full yard for joints alone.

Answer

When should I schedule sand delivery for a hardscape job?

Hardscape season in Hicksville runs spring through fall, with most paver and mortar work wrapping up before the first frost around November 1. Order your sand close to your actual work start date rather than stockpiling it early, since a covered but exposed pile can pick up moisture from rain or dew.

Answer

Where will the sand be placed on delivery day?

The load goes wherever you specify, usually a driveway or a curbside spot with clear access for the delivery truck. Since a cubic yard of sand is dense and heavy, it is worth thinking through your placement ahead of time so you are not moving it far by hand or wheelbarrow.

Answer

Should I use this sand or chip stone for paver bedding?

Many installers around Hicksville have shifted away from sand for the bedding layer under pavers and now use chip stone instead, since it locks together and does not pump up through the joints over time. This sand still works well for the actual joint sweeping and for mortar mixing, so a lot of jobs end up using both materials for different steps.

More delivery around Hicksville, New York

All Hicksville, New York landscape supply