• Jackson TN Sand Delivery - Mulch Mound
  • Jackson TN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for paver joint filling or bedding work. For mortar mixing, the yard figure matters less than the mix ratio, but most masons on a mid size brick job will run through a yard or more once you account for waste. Measure your joint area or mortar batch needs before ordering so you are not short mid pour.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Jackson Sand Delivery

Jackson Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for paver joint filling or bedding work. For mortar mixing, the yard figure matters less than the mix ratio, but most masons on a mid size brick job will run through a yard or more once you account for waste. Measure your joint area or mortar batch needs before ordering so you are not short mid pour.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Jackson Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Mason sand pairs with brick, block, or paver jobs where you already have base stone or gravel down. A lot of jobs around Jackson pair this with crushed stone for the structural base and mason sand on top for joints or setting bed, especially where clay subgrade needs the extra stone layer to keep things from shifting.

Jackson Soil Delivery
Jackson Mulch Delivery
Map of the sand delivery area around Jackson, Tennessee

Service area

Areas we deliver sand in Jackson, Tennessee

See All Locations
Mulch Mound Pro Tip

Mason sand has mostly replaced by chip stone for paver bedding in a lot of markets because sand pumps up through joints over time and washes out with heavy rain, which Jackson gets plenty of in spring. If you are setting pavers, consider chip stone for the bedding layer and save mason sand strictly for joint filling once the pavers are set and compacted.

Mulch Mound Pro Tip

Mortar mixed with mason sand behaves differently once temperatures drop below 40 degrees, which starts to matter here as you approach the November 7 frost date. Cold slows curing and can weaken the bond, so plan brick and block work for the warmer months and avoid pouring mortar joints late into fall unless you can tent or heat the work area.

Mulch Mound Pro Tip

Order slightly more than your calculated coverage, especially for paver joints, since sweeping sand into joints always loses some material to overflow and compaction settling. A little extra sand stored dry under a tarp costs less hassle than a second delivery for 50 square feet of missed joints on a Saturday afternoon.

Working With Sand in Jackson

Jackson sits on clay soil, which means drainage is already working against you on any project involving water or foot traffic. Mason sand does not fix clay drainage, it is not that kind of material, but it gives you a stable uniform base for mortar and paver joints where the clay underneath needs a buffer layer. With hardscape season running spring through fall here and a frost date around November 7, most masonry and patio work needs to wrap before the ground starts working against fresh mortar joints.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand from a hardware store?

No, mason sand is washed and finely screened to a consistent grain size, which is what makes mortar workable and keeps paver joints from binding. Bagged hardware store sand often has inconsistent grain size and impurities that make mortar harder to mix and less predictable to cure.

Answer

How many cubic yards do I need for a patio paver project?

One cubic yard covers about 324 square feet at 1 inch, which is typical for joint filling. If you are also using sand as a bedding layer at 2 inches, plan on about 162 square feet per yard, though many installers now use chip stone for bedding and save sand for joints only.

Answer

When is the best time to do mortar work in Jackson?

Spring through fall, ideally before temperatures start dropping toward the November 7 frost date. Cold weather slows mortar curing and weakens the bond, so most masons here avoid new brick or block work once nighttime temps regularly drop below 40 degrees.

Answer

Where will the sand be dropped and do I need to prep anything?

The truck places the pile at a driveway or access point you specify when you schedule delivery at checkout. Make sure the spot is clear and wide enough for a delivery truck, and have a tarp or containment ready if rain is in the forecast, since Jackson's clay soil turns to mud fast when wet sand meets bare ground.

Answer

Should I use mason sand or chip stone for my paver base?

For the structural bedding layer under pavers, chip stone is increasingly the better choice because it does not pump or wash out the way sand can over time. Mason sand still works well for the final joint fill between pavers once they are set, so many jobs use both materials for different layers.

More delivery around Jackson, Tennessee

All Jackson, Tennessee landscape supply