• Mesa AZ Sand Delivery - Mulch Mound
  • Mesa AZ Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Tracy Bly
Tracy Bly
Google Review

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most mortar or joint fill work only needs 1 to 2 inches. For paver joints on a typical patio, figure the square footage of the paved area and work from the 1 inch coverage number, then double it if you are going closer to 2 inches for wider joints or a deeper bedding layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

FAQs

Read all FAQs

Mesa Sand Delivery

Mesa Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Tracy Bly
Tracy Bly
Google Review

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and most mortar or joint fill work only needs 1 to 2 inches. For paver joints on a typical patio, figure the square footage of the paved area and work from the 1 inch coverage number, then double it if you are going closer to 2 inches for wider joints or a deeper bedding layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Mesa Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Tracy Bly
Tracy Bly

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

Google Review
Eric Waller
Eric Waller

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a ni...

Read full review

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

Google Review
William Schaaf
William Schaaf

This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will b...

Read full review

This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will be a return customer for sure.

Google Review

Complete Your Outdoor Project

Mason sand is usually just one layer of the job. Most Mesa hardscape projects pair it with base rock or crushed base material underneath for stability, and pavers or natural stone on top. If you are leaning toward paver bedding specifically, ask about chip stone instead, since it has largely replaced sand for that use because it does not pump or shift under paver joints.

Mesa Soil Delivery
Mesa Mulch Delivery
Mulch Mound Pro Tip

Mesa's alkaline, sandy native soil can trick people into thinking any sand will do for mortar work, but construction mortar needs a specific, screened particle size to bond and stay workable, which native desert sand does not have. Always use properly washed mason sand for mixing mortar rather than substituting native fill, especially in Mesa's dry heat where mortar sets fast and any inconsistency in the sand shows up as weak or crumbly joints later.

Mulch Mound Pro Tip

A common mistake on Mesa hardscape jobs is ordering paver bedding sand out of habit instead of switching to chip stone, which has largely replaced sand for that specific use because it locks in place and does not pump up through joints under heat and monsoon rain cycles. If your project is paver bedding rather than mortar or pool base, ask about chip stone before you order.

Mulch Mound Pro Tip

Order mason sand and any base rock or chip stone together when possible, since staging both materials on site at once saves you a second delivery fee and lets you sequence the job without waiting between deliveries. Mesa's hardscape season runs heaviest spring through fall, so scheduling ahead during that window helps you avoid gaps between material arrival and available install crews.

Working With Sand in Mesa

Mesa sits on naturally sandy, alkaline soil, so you might think you already have plenty of sand around, but native desert sand is not screened or graded for construction work. Mason sand gives you the consistent particle size that mortar and paver joints actually need, something the ground here does not provide on its own. With hardscape season running spring through fall before the fall building push, a lot of Mesa patios, walkways, and pool decks near projects like the Mesa Arts Center corridor rely on this material to get joints and mortar right. It is a project material, not a soil amendment, so plan orders around actual build phases.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as the sand already in my yard here in Mesa?

No. Mesa's native soil is sandy and alkaline, but it is not washed or graded to a consistent particle size, so it will not work for mortar or paver joints. Mason sand is specifically screened and washed for construction use, which gives mortar the workability and paver joints the fine, consistent fill that native desert sand cannot provide.

Answer

How much mason sand do I need for a paver patio's joints?

Coverage is about 324 square feet per cubic yard at a 1 inch depth. For joint fill you typically need less than a full inch across the whole patio area, so measure your total square footage and use that coverage rate as your starting point, rounding up slightly for waste.

Answer

When is the best time to schedule a mortar or paver project in Mesa?

Spring through fall is peak hardscape season here, since working with mortar and pavers is easier before the coldest stretch that runs roughly November through February. Extreme summer heat can affect mortar working time, so early morning installs during summer months tend to go smoother.

Answer

Where will the sand be placed on delivery day?

We place the load at the driveway or curb location you specify when you check out. Make sure the drop spot has clear truck access and enough room for the full delivery, and let us know ahead of time if your access path is narrow or has any obstacles.

Answer

Should I use mason sand or chip stone for my paver bedding layer?

For paver bedding specifically, chip stone has largely replaced sand because it locks into place and does not pump or shift over time. Mason sand is still the right choice for mortar mixing, paver joint fill, and pool base work, so the answer depends on which part of the project you are doing.

More delivery around Mesa, Arizona

All Mesa, Arizona landscape supply