About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard covers about 54 square feet at a 6 inch depth, so a 10 by 20 foot low spot at 6 inches runs close to 4 yards, and if you need a full 12 inches, double that. Because it weighs around 1.3 tons per cubic yard, larger orders add up fast in both volume and truck weight, so measure the area and target depth before you call in a number.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Miller Place Fill Dirt Delivery

Miller Place Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard covers about 54 square feet at a 6 inch depth, so a 10 by 20 foot low spot at 6 inches runs close to 4 yards, and if you need a full 12 inches, double that. Because it weighs around 1.3 tons per cubic yard, larger orders add up fast in both volume and truck weight, so measure the area and target depth before you call in a number.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Miller Place Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Fill dirt is not a growing medium, so most jobs pair it with a topsoil cap once the grade is built up, especially if lawn or planting beds go on top. Some Miller Place customers also order a base layer of crushed stone under fill near foundations or driveways for drainage before the fill goes in. If you're finishing with sod or seed, plan on 3 to 4 inches of topsoil over the compacted fill.

Map of the fill dirt delivery area around Miller Place, New York

Service area

Areas we deliver fill dirt in Miller Place, New York

Mulch Mound Pro Tip

Fill dirt should go down in 6 to 8 inch lifts, each one compacted before the next goes on, or you will get years of slow settling, especially in the sandy loam common around Miller Place where loose fill migrates with heavy rain. A plate compactor for small areas or a jumping jack for tighter spots against a foundation wall gets the job done. Skipping this step is the number one reason people redo backfill jobs two years later.

Mulch Mound Pro Tip

A common mistake is treating fill dirt like topsoil and planting straight into it. It has no organic matter and compacts hard, so roots struggle and drainage can go either way depending on how tight you packed it. Always cap finished fill with 3 to 4 inches of real topsoil before seeding, sodding, or planting anything, even if the fill layer looks like decent soil once it settles.

Mulch Mound Pro Tip

If you are filling a large low area, order fill dirt for the bulk of the depth and save topsoil for just the top few inches, this keeps cost down since fill runs cheaper per yard than topsoil. It also pairs well with crushed stone as a drainage layer underneath in wetter spots near the water table, which is worth considering on North Shore lots that hold moisture after storms.

Grading and Filling in Miller Place

Around the Miller Place Historic District and the older North Shore lots, you see a mix of sandy loam that drains fast and pockets of low ground that hold water after a nor'easter. Fill dirt is the fix for those wet corners and the settled ground next to foundations where the original backfill compacted over the years. Because it is a structural material, it stays put once compacted, it does not wash out or shift the way a raw sand fill can on these grades. Most jobs here are foundation backfill, pool removals, and building up a yard before topsoil and lawn go in.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I plant grass or a garden directly in fill dirt?

No, fill dirt is a structural material meant to raise grade, not grow anything in. It lacks organic matter and compacts hard. Cap it with 3 to 4 inches of topsoil before seeding, sodding, or planting, and your lawn or beds will establish properly instead of struggling in dense subsoil.

Answer

How many yards do I need to fill in an old pool area?

It depends on the pool's footprint and depth, but a typical 12 by 24 foot inground pool filled to 3 feet deep needs roughly 32 cubic yards. Measure the actual excavation depth and area, then use 54 square feet per yard at 6 inches as your building block to calculate the total.

Answer

Is there a bad time of year to bring in fill dirt around Miller Place?

Fill dirt itself is not seasonal, it is project driven, but ground that is frozen or saturated is harder to compact properly. With first frost around November 15 and last frost around April 7 here, late fall through early spring can mean colder, wetter compaction conditions, so plan extra time for lift compaction in those months.

Answer

Where will the truck put the fill dirt on delivery day?

The truck places the load in one spot, wherever you mark at checkout, typically a driveway or curb area with enough clearance for a full size delivery truck. Make sure that spot is clear and accessible, since the material comes off in a single dump rather than spread across the yard.

Answer

Should I get fill dirt or topsoil for raising my yard's grade?

Use fill dirt for the bulk of the raise since it is denser, compacts well, and costs less per yard, then finish with a topsoil cap of 3 to 4 inches wherever grass or plants need to grow. Using topsoil alone for a large raise gets expensive and does not compact as reliably as fill.

More delivery around Miller Place, New York

All Miller Place, New York landscape supply