• Minneapolis MN Sand Delivery - Mulch Mound
  • Minneapolis MN Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers roughly 324 square feet at a 1 inch depth, and most paver joint or bedding work only calls for 1 to 2 inches. For a typical 300 to 400 square foot patio project in Minneapolis, one to one and a half cubic yards usually covers joint filling and a thin bedding layer, though a full 2 inch bedding course will roughly double what you need per square foot.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

FAQs

Read all FAQs

Minneapolis Sand Delivery

Minneapolis Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers roughly 324 square feet at a 1 inch depth, and most paver joint or bedding work only calls for 1 to 2 inches. For a typical 300 to 400 square foot patio project in Minneapolis, one to one and a half cubic yards usually covers joint filling and a thin bedding layer, though a full 2 inch bedding course will roughly double what you need per square foot.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is approximately 2,000 pounds. Coverage varies by stone type and depth, but as a general guideline, one ton covers roughly 80-100 square feet at 2 inches deep.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Minneapolis Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

Most hardscape jobs around here pair this sand with crushed limestone base or paver base for the sub grade, since sandy loam alone won't give pavers a stable foundation through Minnesota's freeze thaw cycles. If you're mixing mortar for a stone retaining wall or block work, you'll also want cement and gravel on hand. Some contractors are switching paver bedding over to clean chip stone instead, worth asking about if pumping sand under joints has been an issue before.

Minneapolis Soil Delivery
Minneapolis Mulch Delivery
Map of the sand delivery area around Minneapolis, Minnesota

Service area

Areas we deliver sand in Minneapolis, Minnesota

See All Locations
Mulch Mound Pro Tip

Mason sand pumps easily under paver joints when it's dry, which is exactly the problem contractors are running into more often. In Minneapolis's wetter spring and fall months, sand joints can migrate or wash out with heavy rain, especially on sloped patios. If you've had joint failure before, ask about clean chip stone as a jointing alternative, it locks in place and doesn't pump the way fine sand can under repeated freeze thaw cycling.

Mulch Mound Pro Tip

Don't order this sand thinking it will improve drainage in garden beds, that's not what it's graded for. A common mistake is grabbing mason sand for a base course under a paver patio when what's actually needed is compactable crushed base material. Mason sand is too fine and too uniform to compact into a stable structural layer, save it for mortar mixing and the thin joint or bedding layer on top.

Mulch Mound Pro Tip

Order mortar sand and any crushed base or chip stone for the same delivery when possible, since coordinating one drop instead of two saves on multiple delivery scheduling and keeps your job site less congested. If you're doing a multi phase project, sand keeps fine in a dry, covered spot through the season, so ordering a bit extra for touch up joint work later isn't wasted material.

Working With Sand in Minneapolis

Minneapolis sits on sandy loam that drains fine on its own, so this material isn't here to fix your yard, it's here to build with. Contractors laying pavers around patios and walkways in zone 4b need a bedding or jointing sand that won't wash out during spring melt or the heavy fall rains before the Oct 5 frost. Masons mixing mortar for block or stone work need something finer and more consistent than what you'd use under a patio, which is exactly what washed mason sand delivers. With freeze thaw cycles hitting hard here every winter, joint stability matters more than in milder climates.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as the sand used under paver patios?

It can be used as paver bedding, but its main strength is mortar mixing, paver joint filling, and pool bases where a fine, uniform grain matters. Some contractors here have moved bedding sand over to clean chip stone since it resists pumping better under repeated freeze thaw cycles, worth asking about depending on your project.

Answer

How much do I need for a 300 square foot patio?

At 1 inch of coverage, one cubic yard covers about 324 square feet, so a 300 square foot area needs roughly one cubic yard for a thin layer. If you're going with a fuller 2 inch bedding depth, plan on closer to two cubic yards.

Answer

When is the best time to install this in Minneapolis?

Spring through fall is hardscape season here, once the ground has fully thawed after the May 5 last frost and before the Oct 5 first frost locks things up again. Working within that window gives mortar time to cure properly and joints time to settle before winter freeze thaw cycles start working against fresh work.

Answer

Where will the delivery truck place the load?

The load is placed at the spot you specify when you schedule delivery at checkout, typically your driveway or as close to the work area as the truck can safely access. Make sure there's clear overhead room and a path wide enough for a loaded truck, especially if your property has a narrow alley approach common in older Minneapolis neighborhoods.

Answer

Should I use this or chip stone for my paver joints?

Mason sand has been the traditional choice, but chip stone is gaining ground because it resists pumping and washing out, which matters given Minneapolis's spring rains and freeze thaw cycles. If you've had joint sand failure before, chip stone is worth considering, otherwise mason sand still works fine for straightforward jointing jobs.

More delivery around Minneapolis, Minnesota

All Minneapolis, Minnesota landscape supply