I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
At a 1 inch depth, one cubic yard covers about 324 square feet, so a small paver patio or pool base project usually needs less than a full yard. For mortar mixing or joint filling, order is based more on total joint volume than surface area, so measure your joint width and depth rather than square footage alone. Most residential jobs in Nesconset run somewhere between a quarter yard and a full yard depending on scope.
What is a Yard?
What is a Yard?
FAQs
FAQs
Nesconset Sand Delivery
Nesconset Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
How Much Sand Do I Need?
How Much Sand Do I Need?
At a 1 inch depth, one cubic yard covers about 324 square feet, so a small paver patio or pool base project usually needs less than a full yard. For mortar mixing or joint filling, order is based more on total joint volume than surface area, so measure your joint width and depth rather than square footage alone. Most residential jobs in Nesconset run somewhere between a quarter yard and a full yard depending on scope.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Complete Your Outdoor Project
Sand pairs naturally with paver base stone or crushed gravel for patio and walkway builds, and with portland cement for anyone mixing their own mortar on site. Pool installers often order it alongside a vapor barrier liner. If you are also regrading, a load of topsoil or fill can round out the job.
Service area
Areas we deliver sand in Nesconset, New York
Mulch Mound Pro Tip
Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar, it gives you a smoother, more workable mix that holds a joint line cleanly. If you are pointing brick or block near the Smithtown Library area, do not substitute concrete sand thinking it is close enough, the coarser grains fight the trowel and weaken the bond over a Nesconset winter freeze thaw cycle.
Mulch Mound Pro Tip
A common mistake is using sand as paver bedding and expecting it to stay put. Sand pumps and shifts under freeze thaw cycles, which Nesconset sees every winter starting around November 1. Clean chip stone has largely replaced sand for bedding because it locks together and resists that pumping action, so save your sand order for joints and mortar work instead.
Mulch Mound Pro Tip
Order sand and paver base stone together if you are building a patio, since one truck trip covers both materials and saves a second delivery fee. Time your order for spring through fall when hardscape work is active here, sand left outdoors over a Long Island winter can clump if it gets wet and then freezes, so tarp any leftover pile before the first frost.
Working With Sand in Nesconset
Nesconset sits on sandy loam to start with, so drainage is rarely the issue here, it is more about getting the right sand for the job you are actually doing. Hardscape projects like paver patios and walkways are common in this Long Island hamlet, and mason sand is what makes mortar workable when pointing up a wall or setting joints. Pool installers here also use it to shape a smooth base before liner goes down. With frost showing up around November 1 and lasting into April, most sand work happens in the warmer stretch when concrete and mortar cure properly.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.