About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of sand covers roughly 324 square feet at a 1 inch depth, and most mortar or bedding work only needs 1 to 2 inches. For a typical patio or paver joint job in the 200 to 400 square foot range, one cubic yard usually gets you there, but measure your depth needs before ordering since mortar mixing and bedding layers use sand differently.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

North Ridgeville Sand Delivery

North Ridgeville Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard of sand covers roughly 324 square feet at a 1 inch depth, and most mortar or bedding work only needs 1 to 2 inches. For a typical patio or paver joint job in the 200 to 400 square foot range, one cubic yard usually gets you there, but measure your depth needs before ordering since mortar mixing and bedding layers use sand differently.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of North Ridgeville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs with paver base gravel underneath and polymeric jointing sand or chip stone on top, depending on which bedding approach your crew is using. If you are mixing mortar for a brick or stone project, you will also want your aggregate and cement on site before the load arrives so the crew is not waiting around.

Mulch Mound Pro Tip

If you are setting pavers, know that a lot of installers in this region have moved away from sand bedding toward clean chip stone because sand can pump up through joints during freeze thaw cycles, and North Ridgeville gets plenty of those between October and April. Sand still makes sense for mortar mixing and pool base work where that pumping issue does not apply, but for paver bedding specifically, ask your contractor which approach they are using before you order.

Mulch Mound Pro Tip

Sand holds moisture differently than gravel, so if you order it in fall before first frost hits around October 22, stage it somewhere it will not sit in standing water or freeze into a solid block. A tarp over the pile helps if rain is in the forecast before you can use it, especially with our slower draining silt loam soil holding puddles nearby.

Mulch Mound Pro Tip

Buying sand and paver base gravel in the same delivery trip is worth asking about, since it saves a second truck visit and lets your crew build the base and bedding layers back to back. If your project spans both mortar work and paver bedding, order enough sand for both purposes at once rather than guessing twice.

Working With Sand in North Ridgeville

North Ridgeville sits on silt loam, which drains slower than sandy soil and holds water after a spring thaw, so hardscape crews here lean on sand for controlled drainage layers under patios and pool decks rather than fighting the native soil. With frost reaching down through late April, a lot of paver and mortar work here waits until the ground firms up in May. Sand also shows up in mortar mixes for the stone and brick work common on older homes near downtown. Some crews are shifting paver bedding over to clean chip stone since it will not pump the way sand can under freeze thaw cycles.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is the difference between mason sand and the sand you deliver for paver joints?

We deliver washed and finely screened natural sand, which is what most people mean by mason sand. It is finer and more uniform than concrete sand, which is why it works well for mortar mixing and paver joints. Some crews now use chip stone instead of sand for paver bedding since it resists pumping better in freeze thaw conditions.

Answer

How much sand do I need for a 300 square foot patio?

At a 1 inch bedding depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs roughly one cubic yard. If your installer wants a 2 inch layer, plan on closer to two cubic yards. Confirm your depth with your contractor before ordering.

Answer

When is the best time to schedule sand delivery for hardscape work here?

Most hardscape projects in North Ridgeville run spring through fall, once the ground has fully thawed after our last frost around April 30. Ordering sand right before your crew starts keeps it from sitting exposed to rain or freezing overnight, since it holds moisture more than gravel does.

Answer

Where will the truck place the sand on delivery day?

The truck places the load at the edge of your driveway or wherever access allows, so clear a spot at least 10 feet wide before delivery. Let us know about gates, slopes, low branches, or overhead lines when you schedule so the driver can plan the drop safely.

Answer

Should I use sand or chip stone under my pavers?

Sand has traditionally been used for paver bedding, but many installers now prefer chip stone because it does not pump up through joints during freeze thaw cycles, which North Ridgeville sees plenty of each winter. Sand still works well for mortar mixing and pool bases. Ask your contractor which approach fits your specific project.

More delivery around North Ridgeville, Ohio

All North Ridgeville, Ohio landscape supply