About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

One cubic yard covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, so a typical 10 by 12 foot paver patio at 1 inch depth uses well under half a yard for bedding, plus more for joint fill depending on paver spacing. For mortar mixing, order based on your mix ratio rather than area. Since it is sold by the cubic yard, round up slightly rather than short a job midway through a pour or a screed pass.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Novi Sand Delivery

Novi Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

One cubic yard covers about 324 square feet at a 1 inch depth, or roughly half that at 2 inches, so a typical 10 by 12 foot paver patio at 1 inch depth uses well under half a yard for bedding, plus more for joint fill depending on paver spacing. For mortar mixing, order based on your mix ratio rather than area. Since it is sold by the cubic yard, round up slightly rather than short a job midway through a pour or a screed pass.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Novi Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most sand orders in Novi pair with paver base gravel underneath and edge restraints to hold the pattern once it is set. If you are doing a pool deck or patio, you will likely also want paving stone and polymeric jointing sand depending on the finish you are after. For mortar work, pair it with the appropriate cement mix rather than substituting concrete sand, which will not give you the same workability.

Mulch Mound Pro Tip

Novi's clay loam holds moisture longer than sandy soil, so if you are bedding pavers, screed your sand on a dry day and avoid working it right after a rain event, since damp sand compacts unevenly under a screed board. Let any surface water drain first. This matters more here than in areas with faster-draining soil, because the base layer needs to be uniformly dry to get a flat, consistent screed pass.

Mulch Mound Pro Tip

A common mistake is using this material as paver bedding sand when chip stone would hold up better long term. Washed sand can shift and allow paver pumping over freezing winters, which Novi gets plenty of given the October to May frost window. It is still the right call for joint fill and mortar, just be aware that many installers now use angular chip stone under the pavers themselves for stability.

Mulch Mound Pro Tip

If your project involves both mortar work and joint filling, order slightly more than the calculator suggests, since mixing losses and oversweeping joints both eat into your yardage faster than flat coverage math accounts for. Buying it all in one bulk delivery instead of multiple bag runs to a hardware store saves you time on a multi-day masonry job.

Working With Sand in Novi

Novi sits on clay loam, which drains slowly and holds water after spring rain, so a lot of hardscape work here starts with a proper base rather than laying pavers straight into native soil. This sand fills joints and levels bedding layers without adding to that drainage problem the way finer clay does. With a growing season that runs roughly May to October, most patio and paver jobs get scheduled in that window, and the sand needs to be dry-ish and workable when it goes down. It is also the standard choice for mortar mixing on any masonry work around the city.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is this sand actually used for on a typical Novi project?

It is most commonly used for mortar mixing, filling joints between pavers, and as a base layer under pool decks. It is finer and more uniform than concrete sand, which is why masons prefer it for workable mortar. Some installers still use it as paver bedding, though chip stone is increasingly common for that role.

Answer

How many cubic yards do I need for a 300 square foot patio?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio needs just under one full yard for the bedding layer alone. Add extra for joint fill after the pavers are set, since sweeping sand into gaps uses additional volume beyond the flat coverage number.

Answer

When should I install this in Novi's climate?

Spring through fall is the practical window, roughly matching the frost-free stretch from early May to early October. Working with sand when the ground is thawed and reasonably dry gives you a flatter, more consistent screed. Avoid installing right after heavy rain since Novi's clay loam base can stay soggy underneath even after the surface looks dry.

Answer

Where will the delivery truck place the load at my house?

You choose a spot when scheduling, ideally a driveway or other hard, flat surface close to your work area. Trucks need reasonably firm ground to access that spot, so avoid pointing them across wet lawn or clay soil that could rut under the weight, especially after rain.

Answer

Should I use this or concrete sand for my project?

If you are mixing mortar or filling paver joints, this finer washed sand is the right choice since concrete sand is coarser and less workable for those uses. If you are bedding pavers structurally, ask about chip stone instead, since it resists shifting and pumping better than sand does over freeze thaw cycles.

More delivery around Novi, Michigan

All Novi, Michigan landscape supply