• Overland Park KS Sand Delivery - Mulch Mound
  • Overland Park KS Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Bill Doege
Bill Doege
Google Review

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a small paver joint job or mortar mix batch rarely needs more than a partial yard. For mortar mixing specifically, order based on your mix ratio rather than square footage, most mason crews scale by weight since this sand runs about 1.35 tons per cubic yard. If you are unsure, order slightly over, leftover sand keeps fine in a covered pile for the next project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

No description provided.

FAQs

Read all FAQs

Overland Park Sand Delivery

Overland Park Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Bill Doege
Bill Doege
Google Review

At a 1 inch depth, one cubic yard covers roughly 324 square feet, so a small paver joint job or mortar mix batch rarely needs more than a partial yard. For mortar mixing specifically, order based on your mix ratio rather than square footage, most mason crews scale by weight since this sand runs about 1.35 tons per cubic yard. If you are unsure, order slightly over, leftover sand keeps fine in a covered pile for the next project.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

No description provided.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Overland Park Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Mason sand pairs naturally with pavers, edging stone, and mortar mix for anyone building a patio or walkway this season. If your project includes a paver base rather than joints, ask about chip stone instead, since it handles the clay subgrade better without pumping over time. Crews doing pool installs often order both this sand and a bedding gravel in the same delivery to keep the job moving.

Overland Park Soil Delivery
Overland Park Mulch Delivery
Map of the sand delivery area around Overland Park, Kansas

Service area

Areas we deliver sand in Overland Park, Kansas

See All Locations
Mulch Mound Pro Tip

Mason sand for mortar needs to stay dry until mixing, so if you're ordering ahead of an OP spring rain, tarp the pile immediately. Wet sand throws off your mortar ratio and makes the mix inconsistent, which shows up as weak joints later. If your project spans several days, keep the pile covered between mixing sessions rather than exposing the whole load at once.

Mulch Mound Pro Tip

A common mistake on clay lots here is skipping compaction under paver joints filled with this sand, assuming the fine grain will settle on its own. It will not, not reliably, and freeze thaw cycles from October through April will pull joints apart over a season or two. Sweep sand into joints in stages and vibrate or tamp between passes rather than filling once and walking away.

Mulch Mound Pro Tip

If your project only needs joint sand, not a full mortar mix, you likely need less than a full cubic yard, and ordering a partial load saves you from storing excess through a Kansas winter. Pair the order with your paver delivery so both loads land the same day, it saves a second delivery fee and keeps the job on one timeline instead of waiting on materials twice.

Working With Sand in Overland Park

OP sits on heavy clay, which is exactly why finer sand matters for mortar work here, clay soil does not forgive sloppy mixes and a uniform sand keeps mortar workable through the pour. Pool base and paver joint jobs are common across the city's newer subdivisions, and this sand's fine, consistent grain fills those joints without leaving voids. With freeze and thaw cycles running from late fall into April, any sand used under pavers needs to compact tight or it will shift when the ground moves. Some crews are shifting paver bedding over to chip stone since it drains better and does not pump under a clay base, worth asking your installer about if that is the job.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same sand used for mortar and paver joints, or do I need two different products?

Mason sand works for both, it is the finer, washed grade that makes mortar mix workable and also settles tightly into paver joints. Concrete sand is a coarser alternative for structural mixes but is not what most Overland Park mortar or joint jobs call for. If your project needs paver bedding rather than joint fill, ask about chip stone instead.

Answer

How many cubic yards do I need for a patio joint fill?

One cubic yard covers about 324 square feet at a 1 inch depth, so most residential patios need well under a full yard for joint sand alone. Measure your total paver square footage, most joint fill jobs only need a thin layer worked into the gaps, not a full inch across the whole surface.

Answer

When is the best time to install paver joints with sand in Overland Park?

Spring through fall is ideal, once temperatures stay reliably above freezing after the April 10 last frost date. Sand needs to be dry when swept into joints, so avoid scheduling right after rain. Fall installs before the October 20 first frost also work, giving joints time to settle before winter freeze cycles begin.

Answer

Where will the sand be dropped on delivery day?

The load is placed wherever you specify at checkout, typically a driveway or staging area with truck access. Make sure the drop zone is clear and wide enough for a dump truck, and protect the surface with a tarp or plywood if you are concerned about staining or scratching.

Answer

Should I use mason sand or chip stone for paver base in my yard?

For paver joints and mortar mixing, mason sand is the right choice due to its fine, uniform grain. For paver bedding under the pavers themselves, many installers now prefer chip stone since it drains better on clay soil and does not pump or shift the way sand can over time.

More delivery around Overland Park, Kansas

All Overland Park, Kansas landscape supply