I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!
I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).
Complete Your Outdoor Project
Mason sand pairs naturally with paver base stone, polymeric jointing sand, or bagged mortar mix depending on what you are building. If you are setting a paver patio, you will likely also want a compactable base material underneath before the sand ever gets used at the joints. For pool installs, a clean gravel or stone base often goes down first.
Mason sand is finer and more angular than the chip stone many contractors now use under pavers, which matters because sand can migrate and wash out under heavy rain, something that happens more often here given how much rain the Ohio Valley gets in spring. If you are jointing pavers, consider polymeric sand instead of plain mason sand for anything exposed to weather, since it locks in place once it sets and resists the washout that plain sand does not.
A common mistake with mason sand is storing it uncovered before a mortar job. Once it absorbs rain it changes your water to sand ratio and throws off workability, which matters more with mortar than with most bulk materials. Keep your pile tarped between delivery and use, especially during Paducah's wetter spring and fall stretches, and screen out any clumps before mixing so your batches stay consistent from the first bag to the last.
If your project only needs a small amount of mason sand, like a mortar batch for a brick repair or a few paver joints, it often makes sense to combine that order with a bedding material delivery rather than schedule two separate trips. Many contractors here order chip stone for the base and a smaller volume of mason sand for finishing work in the same load, which saves a delivery trip and keeps both materials on site when the crew needs them.
Working With Sand in Paducah
Paducah sits on silt loam, which drains slower and holds moisture longer than sandy soils, so masons here often keep mason sand on hand separately from any fill or bedding project. With hardscape season running spring through fall ahead of the Oct 26 first frost, most mortar and paver joint work needs to be finished and cured before cold weather sets in. If you are building near the riverfront or downtown near the Quilt Museum, sand for paver joints still gets specified on some jobs, though many contractors here have shifted to chip stone bedding since it does not pump or wash out during Ohio Valley rain.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.