• Palmdale CA Sand Delivery - Mulch Mound
  • Palmdale CA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar or bedding work only needs 1 to 2 inches, so a single yard goes a long way on a patio or paver project. For pool base work, figure your footprint at the deeper end of that range, closer to 2 inches, since it needs to compact solid under the liner. Order by the cubic yard and round up slightly, running short mid pour is worse than having a little extra on hand.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Palmdale Sand Delivery

Palmdale Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar or bedding work only needs 1 to 2 inches, so a single yard goes a long way on a patio or paver project. For pool base work, figure your footprint at the deeper end of that range, closer to 2 inches, since it needs to compact solid under the liner. Order by the cubic yard and round up slightly, running short mid pour is worse than having a little extra on hand.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Palmdale Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most paver jobs around here pair this sand with a base layer of crushed aggregate underneath and either polymeric sand or more mason sand in the joints once the pavers are set. If you're mixing mortar on site, keep a portion of your delivery separate and dry until you're ready to batch it, since Palmdale's low humidity means it draws moisture out of a pile faster than you'd expect.

Palmdale Soil Delivery
Palmdale Mulch Delivery
Map of the sand delivery area around Palmdale, California

Service area

Areas we deliver sand in Palmdale, California

See All Locations
Mulch Mound Pro Tip

In Palmdale's dry heat, mixed mortar can start setting up faster than the label suggests, especially midday in summer. Mix smaller batches than you think you need, work in the shade of the structure you're building if possible, and keep a spray bottle handy to rewet the mix surface if it starts skinning over before you've placed it. This matters more here than in coastal cities with higher ambient humidity.

Mulch Mound Pro Tip

A common mistake is using mason sand as paver bedding sand and wondering why joints keep pumping fines up through the pavers after a rain. This sand is fine and uniform, great for mortar, but it moves under repeated foot traffic and vibration in a bedding application. If you're setting pavers, ask about clean chip stone for the bedding layer and save the mason sand for the joints and any mortar work.

Mulch Mound Pro Tip

If your project needs both bedding material and mason sand, order them as separate deliveries or clearly separated piles, they look almost identical once dumped and mixing them up mid job means redoing sections. Label your piles with a stake or marker if you're staging multiple materials on site, especially on a driveway where space is tight.

Working With Sand in Palmdale

Palmdale sits on sandy loam already, so this sand is not fighting your native soil, it is doing a specific job on top of it, mainly mortar and paver joint work. With the Antelope Valley's dry, low humidity air, mixed mortar sets fast, so people here tend to mix in smaller batches rather than one big pour. Pool base work is common in this climate given how many backyards here get built out for summer, and this sand's fine, uniform grain is what makes that base compact evenly instead of shifting under the shell.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand for a sandbox or fill dirt?

No, this is washed and finely screened for mortar mixing, paver joints, and pool bases, not general fill. It's a finer, more uniform grain than fill sand or play sand. If you need something for leveling ground or backfilling, ask about a different material, this one is built for precision hardscape work.

Answer

How many cubic yards do I need for a small backyard patio?

One cubic yard covers about 324 square feet at 1 inch deep, so for a typical 200 to 300 square foot patio base or joint fill, one yard usually covers it with some to spare. For pool base work at 2 inches deep, cut that coverage in half per yard, so plan closer to a full yard per 150 to 160 square feet.

Answer

When is the best time of year to do paver or mortar work in Palmdale?

Spring through fall is when most hardscape projects happen here, once nights warm up past the March 15 last frost date and before things cool back down near November. Avoid mixing mortar in peak summer afternoon heat if you can, early morning gives you more working time before it sets.

Answer

Do you need clear access to my driveway for delivery?

Yes, the delivery truck needs enough clearance to reach and dump at the spot you specify, roughly the space of a parked car with overhead clearance for the truck bed. Let us know at checkout if there are gate widths, low branches, or slope issues so the load ends up where you actually need it.

Answer

Should I use mason sand or chip stone for my paver bedding layer?

For paver bedding specifically, many builders are moving to clean chip stone instead of mason sand, since chip stone does not pump up through joints the way fine sand can under freeze thaw or heavy rain. Mason sand is still the right call for the joints themselves and for mortar mixing, so many jobs end up using both materials for different layers.

More delivery around Palmdale, California

All Palmdale, California landscape supply