• Pasco WA Sand Delivery - Mulch Mound
  • Pasco WA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard covers about 324 square feet at a 1 inch depth, and typical install depth for mason work runs 1 to 2 inches depending on the application. Mortar mixing needs less volume overall since it is measured by the batch, while paver joint fill and pool base prep should be figured off your actual square footage. Order by the cubic yard and round up slightly, running short mid pour is the bigger headache.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Pasco Sand Delivery

Pasco Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard covers about 324 square feet at a 1 inch depth, and typical install depth for mason work runs 1 to 2 inches depending on the application. Mortar mixing needs less volume overall since it is measured by the batch, while paver joint fill and pool base prep should be figured off your actual square footage. Order by the cubic yard and round up slightly, running short mid pour is the bigger headache.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Pasco Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Most Pasco jobs pairing sand also need paver base gravel or crushed rock for compaction underneath, and some crews are shifting to clean chip stone instead of sand for the actual bedding layer since it will not pump or wash out. If you are mixing mortar, keep cement and any masonry tools on site before the load arrives so you are not waiting on a supply run mid mix.

Pasco Soil Delivery
Pasco Mulch Delivery
Map of the sand delivery area around Pasco, Washington

Service area

Areas we deliver sand in Pasco, Washington

See All Locations
Mulch Mound Pro Tip

If you are using this for paver joints on a patio near Sacajawea State Park or anywhere with river breeze, sweep it in dry and compact with a plate tamper before any watering. Damp mason sand clumps and will not settle into the joints evenly. Pasco's low humidity actually works in your favor here since the sand stays dry and pourable longer than it would in a coastal climate.

Mulch Mound Pro Tip

A common mistake is substituting mason sand for concrete sand in structural mixes. It is finer and more uniform, which makes mortar workable but means it lacks the coarser particles that give poured concrete its strength. Keep the two separated on site, even a shovel's worth mixed in can throw off a batch you are trying to match to a spec.

Mulch Mound Pro Tip

If your project is paver bedding rather than mortar or pool base, consider clean chip stone instead. It has been replacing sand for bedding layers because it will not pump up through joints over time or wash out during Pasco's occasional heavy spring runoff. Save the mason sand for mortar and joint fill where its fine grain actually earns its keep.

Working With Sand in Pasco

Pasco already sits on sandy loam, so this material is not fighting your native ground, it is refining it for a specific task. With low rainfall most of the year and hot dry summers, sand stays workable and does not clump the way it might in a wetter climate. Around here it shows up most in mortar batches for block work and in the joints of paver patios near the river. It is not a groundcover or a mulch substitute, it is a build material for structure.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as concrete sand?

No, mason sand is finer and more uniformly screened, which is what makes mortar workable when mixed with cement. Concrete sand has coarser particles suited for structural pours. Using one in place of the other can affect strength and workability, so keep them for their intended jobs.

Answer

How much sand do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, so measure your joint area rather than the whole patio footprint since you are only filling gaps, not the full surface. Most residential paver jobs in Pasco need well under a full yard unless the patio is large.

Answer

When is the best time to install sand for a hardscape project in Pasco?

Spring through fall is peak hardscape season here, when the ground is workable and dry. Avoid working sand into joints during Pasco's rare wet spells since damp sand compacts unevenly. Dry, mild days give you the best control over placement.

Answer

Where will the sand be placed on my property?

We place it wherever you have a clear, accessible spot, typically your driveway or a flat area near the work site. Let us know if access is tight, since a full load is heavy and hard to relocate by hand once it is dropped.

Answer

Should I use sand or chip stone for paver bedding?

Many crews in the area have moved to clean chip stone for bedding because it locks in place and will not pump up through joints over time the way sand can. Mason sand still works well for joint fill, mortar, and pool base, just not as the bedding layer under the pavers themselves.

More delivery around Pasco, Washington

All Pasco, Washington landscape supply