About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most grading or backfill jobs in this area run 6 to 12 inches deep depending on how low the spot is. Measure the length and width of the area you're raising, decide your target depth, and order in cubic yards from there. For anything over a couple yards, get it delivered rather than hauling it bag by bag.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Port Orange Fill Dirt Delivery

Port Orange Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most grading or backfill jobs in this area run 6 to 12 inches deep depending on how low the spot is. Measure the length and width of the area you're raising, decide your target depth, and order in cubic yards from there. For anything over a couple yards, get it delivered rather than hauling it bag by bag.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Port Orange Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a cap of topsoil once the grade is set, since fill dirt itself won't support grass or plants. Sod or seed goes down after that, and some jobs add a layer of sand underneath pavers or pool decking for drainage before the fill even goes in.

Mulch Mound Pro Tip

Don't dump fill dirt in one deep pour. Spread it in 6 to 8 inch lifts and compact each one with a plate tamper or hand tamper before adding the next layer. Port Orange's sandy base drains well but skips this step and you'll watch that new grade sink unevenly over a year or two as rain works through it, especially near pool decks where settling shows up fast as cracked pavers.

Mulch Mound Pro Tip

A common mistake here is trying to grow grass straight on top of fill dirt. It's subsoil, stripped of the organic material lawns need, so cap it with 4 to 6 inches of real topsoil before sod or seed goes down. Skip that step and you'll get patchy, stressed turf no matter how much you water it through our long growing season.

Mulch Mound Pro Tip

If you're raising a large low area, order fill dirt for the bulk of the depth and save topsoil for just the top few inches where roots actually live. This costs less overall than filling the whole area with topsoil and it performs better structurally, since fill dirt compacts into a stable base and topsoil doesn't.

Grading and Filling in Port Orange

Port Orange sits low, only about 20 feet of elevation, and a lot of lots hold water after the summer storms roll through. Sandy native soil drains fast on top but plenty of yards still have soggy low spots or old pool areas that need real elevation change. Fill dirt is what actually corrects that grade, not topsoil, because it compacts into a stable base instead of washing or settling unevenly. People here use it to build up before laying sod or pavers so the new grade actually holds through the wet season.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Will fill dirt work to raise the low corner of my yard where water sits after rain?

Yes, that's one of the most common uses for it here given how flat and low much of Port Orange sits. Build it up in compacted 6 to 8 inch lifts to your target height, then cap with topsoil if you want grass to establish on top. Just make sure you're not blocking natural drainage toward the street or a swale.

Answer

How many cubic yards do I need to fill in around a pool that's being removed?

It depends on the pool's footprint and depth, but a typical inground pool hole runs several feet deep across a large area, often needing 20 to 40 cubic yards or more. Measure the length, width, and depth of the excavation, then order enough to fill it in 6 to 8 inch compacted lifts rather than one pour.

Answer

When is the best time of year to bring in fill dirt in Port Orange?

Fill dirt work is driven by the project, not the season, but drier stretches make compaction easier and cleaner to work with. Our wet summer months can leave the ground soft, so if you have flexibility, tackle grading jobs in the cooler, drier months between our December and February frost dates.

Answer

Where will the delivery truck place the load, and do I need to prepare anything?

We place the load as close to your marked drop spot as the truck can safely access, so clear a path of at least 10 to 12 feet wide beforehand. If your driveway or yard access is tight, let us know ahead of time so we can plan the drop accordingly.

Answer

Should I get fill dirt or topsoil for leveling my yard?

Use fill dirt for the bulk of any depth change, since it compacts into a stable base and costs less to move in volume. Reserve topsoil for the top 4 to 6 inches only, where grass or plants actually need to root, since fill dirt alone won't support healthy growth.

More delivery around Port Orange, Florida

All Port Orange, Florida landscape supply