About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard of mason sand covers about 324 square feet, so a typical paver patio or pool deck base needs less than you'd think. For mortar mixing you're working in smaller batches, so order based on total project square footage and expected joint or bed thickness rather than covering the whole area at 2 inches. Most hardscape jobs in Port Orange land between 1 and 2 inches depending on whether it's joint fill or a bedding layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Port Orange Sand Delivery

Port Orange Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard of mason sand covers about 324 square feet, so a typical paver patio or pool deck base needs less than you'd think. For mortar mixing you're working in smaller batches, so order based on total project square footage and expected joint or bed thickness rather than covering the whole area at 2 inches. Most hardscape jobs in Port Orange land between 1 and 2 inches depending on whether it's joint fill or a bedding layer.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Port Orange Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs with paver base stone or clean chip stone underneath it for a stable, well drained hardscape foundation, especially useful given how sandy the native soil already is here. If you're mixing mortar for a block wall or brick veneer, you'll also want cement and lime on hand before the sand arrives. Pool builders often order this alongside crushed stone for a full base package.

Mulch Mound Pro Tip

Mason sand only works if it stays washed and clean going into your mortar mix, so keep the pile off bare dirt and covered with a tarp between uses, especially during Port Orange's rainy stretches. Contaminated sand with organic debris mixed in will weaken your mortar bond and cause discoloration in exposed brick or block joints, which shows up fast on a finished wall.

Mulch Mound Pro Tip

A lot of installers still spec mason sand under pavers out of habit, but it's increasingly being replaced by clean chip stone for bedding because sand migrates and pumps water up through joints over time, especially in a wet climate like this one. If you're building a paver patio near the coast, ask about chip stone for the base layer and save the mason sand strictly for joint fill and mortar work.

Mulch Mound Pro Tip

Order mortar sand and paver base stone in the same delivery when possible, it saves a trip and keeps the job moving instead of waiting on a second load mid pour. Since sand is sold and priced by the cubic yard here, slightly over ordering by half a yard costs little compared to a stalled crew waiting on more material on a Saturday.

Working With Sand in Port Orange

Port Orange sits on naturally sandy ground already, so this material is not fighting your native soil, it is doing a specific job on top of it. Around Dunlawton Sugar Mill Gardens and the older neighborhoods near it, homeowners use mason sand for paver patios, pool deck bases, and mortar mixes for brick and block work. With the Fun Coast humidity and a hardscape season that runs spring through fall, having washed sand on hand keeps mortar workable in the heat instead of drying and crumbling before it sets. It is not a mulch bed material, it is a builder's material.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as regular sand from a hardware store bag?

No, this is washed and finely screened mason sand delivered in bulk by the cubic yard, not bagged play sand or all purpose sand. It is uniform enough for mortar mixing and paver joint work, which bagged sand often is not. Buying bulk also works out better for any project bigger than a small patch job.

Answer

How much sand do I need for a pool deck or patio?

At 1 inch of depth, a cubic yard covers roughly 324 square feet, so a 300 square foot pool deck base needs about 1 cubic yard. If you're using it for joint fill instead of a full bed, you'll use significantly less per square foot, so measure your total area first and decide depth based on whether it's bedding or joints.

Answer

When is the best time to install sand for a hardscape project in Port Orange?

Spring through fall is peak hardscape season here, and that timing works well since Port Orange doesn't see hard freezes until mid December at the earliest. Just watch for heavy summer rain when mixing mortar, keep it covered and work in smaller batches so it doesn't dry out or wash out before it sets.

Answer

Where will the sand be placed on my property?

You tell us where at checkout, typically a driveway or staging area with clear truck access. Make sure the spot is cleared ahead of the delivery date and wide enough for the truck to maneuver, especially on narrower Port Orange lots near older neighborhoods.

Answer

Should I use mason sand or chip stone under my pavers?

Chip stone is increasingly preferred for paver bedding because it does not pump or migrate under wet conditions, which matters in a humid coastal climate. Mason sand still makes sense for joint fill and mortar mixing where its fine, uniform texture is exactly what you need. For a full paver base, ask about ordering both together.

More delivery around Port Orange, Florida

All Port Orange, Florida landscape supply