About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most mortar or joint work only calls for a 1 to 2 inch layer, so a single yard often handles a good sized patio or walkway project. For pool base work or thicker beds, plan closer to 2 inches and figure your yardage accordingly. Measure the actual work area before ordering since sand is bought for a specific job, not stockpiled.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

Prescott Sand Delivery

Prescott Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most mortar or joint work only calls for a 1 to 2 inch layer, so a single yard often handles a good sized patio or walkway project. For pool base work or thicker beds, plan closer to 2 inches and figure your yardage accordingly. Measure the actual work area before ordering since sand is bought for a specific job, not stockpiled.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Prescott Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base material and edging on hardscape jobs, and with mortar mix or cement on masonry work. If you are building a patio or walkway, you may also want a compactable base layer underneath before the sand goes down. Many Prescott jobs run sand alongside gravel or flagstone delivered the same trip.

Mulch Mound Pro Tip

At 5,368 feet, temperature swings between day and night are sharper than at lower elevations, and that affects mortar cure time. Mix mason sand with your mortar in smaller batches during the shoulder seasons so it does not set up before you can work it, especially on cooler spring and fall mornings before the afternoon warms up. Working in small batches also keeps the mix consistent across a full paver joint job.

Mulch Mound Pro Tip

A common mistake is using this sand as paver bedding under a full patio. It is finer and more uniform than concrete sand, which is exactly what makes it workable for mortar, but that same fineness means it can migrate or pump under freeze thaw cycling. For bedding, clean chip stone holds up better long term and is what most builders here are shifting toward.

Mulch Mound Pro Tip

Order sand for the specific job in front of you rather than rounding up for future use. Because it is project driven, unused sand tends to sit and gets picked up by wind or rain runoff on sloped Prescott lots. Pair your sand order with paver base or mortar mix delivered the same trip to save a second delivery and keep the whole job moving in one pass.

Working With Sand in Prescott

Prescott sits at 5,368 feet on rocky loam that does not compact or drain like a sandy valley soil, so masons here lean on sand to build consistent joints and beds that the native ground cannot provide. At this elevation the freeze thaw cycle between the Apr 22 last frost and the Oct 28 first frost stresses mortar joints and paver bases, so a uniform, well graded sand matters more than it would somewhere milder. Most of the demand we see is hardscape driven, patios, walkways, pool decks, not turf or bedding work. That project driven pattern means people order what they need for a specific build rather than topping off a yard.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, what we deliver is washed and finely screened natural sand, which is what most people mean when they ask for mason sand. It is finer and more uniform than concrete sand, which is why it works well for mortar mixing and paver joints rather than structural bedding.

Answer

How much sand do I need for a paver patio in Prescott?

One cubic yard covers about 324 square feet at a 1 inch depth. For joint filling on an existing patio, that same yard goes much further since you are only filling gaps, not covering the whole surface. Measure your area and depth first, then we can help you land on the right yardage.

Answer

When is the best time to do hardscape work here?

Spring through fall is peak hardscape season in Prescott, roughly between the Apr 22 last frost and the Oct 28 first frost. Mortar and paver work outside that window risks slow curing or freeze damage before the joints set, so most builders schedule sand deliveries within that stretch.

Answer

Can you deliver to a sloped or narrow driveway?

In many cases yes, but Prescott's hillside lots near Whiskey Row and the surrounding neighborhoods sometimes need a specific drop spot due to grade or access width. Let us know your site conditions when you schedule so the delivery crew can plan placement accordingly.

Answer

Should I use this sand or chip stone for paver bedding?

For paver bedding specifically, clean chip stone is increasingly preferred because it does not pump or shift under freeze thaw cycling the way finer sand can. This sand is better suited to mortar mixing and joint filling, where its fine, uniform texture is actually an advantage.

More delivery around Prescott, Arizona

All Prescott, Arizona landscape supply