About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and typical install depth for mortar work or joint filling runs 1 to 2 inches. A small patio or paver joint job might only need a fraction of a yard, while a pool deck or larger mortar mixing job will run closer to a full yard or more. Since it is sold by the cubic yard, it pays to measure the actual work area before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

South Farmingdale Sand Delivery

South Farmingdale Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my orde...

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, and typical install depth for mortar work or joint filling runs 1 to 2 inches. A small patio or paver joint job might only need a fraction of a yard, while a pool deck or larger mortar mixing job will run closer to a full yard or more. Since it is sold by the cubic yard, it pays to measure the actual work area before ordering.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of South Farmingdale Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most jobs pairing mason sand also need pavers or natural stone for the surface itself, and often a base layer of crushed stone or gravel underneath for structure. If you are mixing mortar, cement is the obvious companion. For paver joints, some crews are now pairing sand with polymeric sand or chip stone instead, depending on how much movement the joint needs to handle.

Mulch Mound Pro Tip

Mason sand for mortar work should stay dry until mixing, so tarp the pile as soon as it lands, especially with South Farmingdale's coastal humidity and fall rain leading up to the Nov 15 frost. Wet sand throws off mortar ratios and makes the mix inconsistent from batch to batch. Keep it covered on a pallet or plywood base if you are storing it more than a day or two before use.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using mason sand as bedding under the pavers themselves instead of just in the joints. It compacts less predictably than chip stone and can pump up through joints after heavy rain, which is exactly the failure mode more Long Island crews are trying to avoid by switching bedding materials.

Mulch Mound Pro Tip

If you are doing both a mortar mix and paver joints on the same job, order mason sand for both rather than switching materials mid project. It keeps your ordering simple and the fine grain works for either use, though double check your mason if they prefer a different ratio for structural mortar versus joint sweeping.

Working With Sand in South Farmingdale

South Farmingdale sits on sandy loam already, so drainage is rarely the problem here, it is more about getting a consistent, fine sand for mortar mixes and paver joint work on patios near Ellsworth W. Allen Town Park and in the surrounding neighborhoods. With a hardscape season that runs spring through fall before the Nov 15 frost, most of this sand moves into mortar boards and joint sweeping on walkways and pool decks. Some crews still use it as bedding under pavers, though more are shifting to chip stone for that step since it locks in place instead of pumping. Either way, the fine, uniform grain is what makes it useful here.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand from the yard next door?

Not quite. Mason sand is washed and finely screened to a more uniform grain size than general fill or concrete sand. That consistency is what makes mortar workable and lets it settle evenly into paver joints, which is why it is specified for those jobs rather than a coarser sand.

Answer

How many cubic yards do I need for a small patio's paver joints?

One cubic yard covers about 324 square feet at a 1 inch depth, but joint filling uses far less material per square foot than a full depth application. Most small patios in South Farmingdale only need a fraction of a yard, so measure your patio's total square footage and order conservatively, extra sand stores fine for future touch ups.

Answer

When is the best time to do mortar work in South Farmingdale?

Spring through fall is the practical window, before the Nov 15 first frost when mortar curing gets unreliable in cold temperatures. Most masonry and hardscape work here clusters in that stretch, so schedule material delivery around your actual project timeline rather than waiting until late fall.

Answer

Where will the sand be placed when it's delivered?

The truck places the load wherever you specify, typically a driveway or curbside spot with clear access. Let us know at checkout if there are any access issues like narrow driveways or low branches, and have the drop spot cleared and flat before the truck arrives.

Answer

Should I use mason sand or chip stone for paver bedding?

More crews on Long Island are moving toward chip stone for paver bedding because it locks in place and resists pumping after rain, unlike sand which can shift under heavy use. Mason sand still works well for the joints themselves, so many jobs end up using both materials for different parts of the same installation.

More delivery around South Farmingdale, New York

All South Farmingdale, New York landscape supply