About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical paver patio or mortar prep job usually runs a fraction of a yard to a couple of yards depending on size. Because install depth for this material is usually just 1 to 2 inches, most residential jobs in Southfield do not need a large order, so measure your patio, walkway, or pool pad footprint first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Southfield Sand Delivery

Southfield Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

At a 1 inch depth, one cubic yard covers about 324 square feet, so a typical paver patio or mortar prep job usually runs a fraction of a yard to a couple of yards depending on size. Because install depth for this material is usually just 1 to 2 inches, most residential jobs in Southfield do not need a large order, so measure your patio, walkway, or pool pad footprint first and work backward from there.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Southfield Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most paver jobs around Southfield pair this sand with a compacted gravel base underneath and edge restraints to keep everything locked in place once traffic and freeze-thaw cycles start. If you are doing mortar work, you will also want your cement and any decorative stone veneer on hand before the load arrives. Some crews are shifting to chip stone for paver bedding instead, since it does not pump the way sand can under repeated freeze-thaw, worth asking about if you want the more current approach.

Mulch Mound Pro Tip

Southfield's clay loam holds moisture longer than sandy soils, so if you are setting pavers, do not skip a compacted gravel base under the sand layer, the sand alone will not drain the way it might in a sandier region. Screed the sand bedding layer to an even 1 inch just before laying pavers, not days ahead, since exposed sand can absorb ground moisture from the clay below and settle unevenly before you even start.

Mulch Mound Pro Tip

A common mistake on mortar jobs here is mixing on a rainy or humid day without adjusting water ratios, since this sand is finer than concrete sand and takes on moisture differently. Test your mix consistency in small batches first. Timing matters too, plan masonry and paver work for the drier stretch between late spring and early fall rather than right after the May thaw when everything is still saturated.

Mulch Mound Pro Tip

If your project is paver bedding specifically, ask about chip stone instead of sand, since sand bedding is increasingly being replaced because it can pump out from under pavers over time with freeze-thaw cycling, something Southfield sees plenty of given its winters. For mortar mixing or pool base work, though, this sand remains the right call and pairs well with a bulk cement order to avoid multiple small purchases.

Working With Sand in Southfield

Southfield sits on clay loam that holds water and stays cool into spring, which is part of why builders here rely on a clean, uniform sand rather than native soil for anything structural. With a last frost around May 3 and hardscape work often starting right after, contractors want a bedding and jointing material that will not shift once the clay underneath softens with spring rain. This sand is finer and more consistent than concrete sand, which is exactly what makes mortar mixes workable on masonry jobs across the city. It is also a common pick for pool base work where a level, stable layer matters more than drainage.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is this sand actually used for on a typical Southfield project?

It is mainly used for mortar mixing, paver joint filling, and pool base leveling. It is finer and more uniform than concrete sand, which is what makes it workable for masonry mixes. Some builders still use it under pavers, though chip stone is becoming more common for that specific use since it resists pumping.

Answer

How many cubic yards do I need for a small patio?

At a 1 inch install depth, one cubic yard covers about 324 square feet, so a 200 square foot patio bedding layer would use roughly two thirds of a yard. Round up slightly for waste and uneven screeding, and remember install depth here is typically only 1 to 2 inches, not a thick base layer.

Answer

When is the best time to schedule sand delivery in Southfield?

Most hardscape and mortar work happens spring through fall once the ground has dried out from the winter freeze-thaw cycle, generally after the May 3 last frost. Working with saturated clay loam soil underneath makes leveling and compaction harder, so waiting a few weeks past thaw usually gives better results.

Answer

Where will the sand be dropped off, and do I need to prep anything?

The driver places the load wherever you designate, usually a driveway or the edge of the project area, and delivery timing is confirmed at checkout. Clear the drop zone beforehand and make sure there is truck access, since some of Southfield's older subdivision streets are narrower than newer developments.

Answer

Should I use this sand or chip stone under my pavers?

Sand has traditionally been used for paver bedding, but chip stone is increasingly preferred because it locks together and does not pump out the way sand can under repeated freeze-thaw cycles, which Southfield gets plenty of each winter. This sand is still the better choice for mortar mixing and pool base work where a fine, uniform texture matters more.

More delivery around Southfield, Michigan

All Southfield, Michigan landscape supply