About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard covers roughly 324 square feet at a 1 inch depth, so a small mortar batch or a paver joint job might only need a partial yard, while a pool deck base could run several yards at the 1 to 2 inch install depth. Since it is sold by the cubic yard, measure your project area first and decide whether you are laying it thin for joints or thicker for a base. Most masonry and joint work stays on the 1 inch end of that range.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Starkville Sand Delivery

Starkville Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard covers roughly 324 square feet at a 1 inch depth, so a small mortar batch or a paver joint job might only need a partial yard, while a pool deck base could run several yards at the 1 to 2 inch install depth. Since it is sold by the cubic yard, measure your project area first and decide whether you are laying it thin for joints or thicker for a base. Most masonry and joint work stays on the 1 inch end of that range.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Starkville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs naturally with paver base stone or crushed stone underneath it, and with mortar mix or polymeric jointing sand on top. If your project is a paver patio rather than mortar work, ask about chip stone as a bedding alternative, it is increasingly used in place of sand because it will not pump out under Starkville's freeze thaw swings.

Map of the sand delivery area around Starkville, Mississippi

Service area

Areas we deliver sand in Starkville, Mississippi

Mulch Mound Pro Tip

Starkville's clay subgrade means water does not drain through a sand base the way it would in sandier soils farther south. If you are setting pavers on a sand bed, compact your gravel base thoroughly first and crown it slightly so water sheds off rather than pooling under the sand layer, especially given how much rain the Golden Triangle gets in spring.

Mulch Mound Pro Tip

A common mistake is buying mason sand for paver bedding because it is the traditional choice. It works, but it can migrate and wash out over time, especially with clay soil holding water against it. Many masons now switch to angular chip stone for bedding and joints, saving mason sand strictly for mortar mixing where its fine, uniform grain actually matters.

Mulch Mound Pro Tip

Buy mortar sand and any paver base stone in the same delivery when you can, it saves a second trip charge and lets you stage materials together on site. If your project spans a weekend, tarp the sand pile overnight, Starkville's spring and fall rains can turn a dry pile heavy and hard to shovel by morning.

Working With Sand in Starkville

Starkville sits on prairie clay, which drains slowly and gets heavy and sticky when wet, so most sand deliveries here go straight into hardscape work rather than soil amendment. Mason sand does not fix clay drainage, it is meant for mortar and jointing, not for mixing into beds. With hot, humid summers and clay underneath, a lot of local patios and walkways rely on a properly compacted base before any sand goes down. Fine, uniform grains like this are what let mortar stay workable long enough to set a joint straight.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand or concrete sand?

It is mason sand, which is finer and more uniformly graded than concrete sand. That finer grain is what makes mortar workable enough to trowel and set joints cleanly. Concrete sand is coarser and used for structural concrete mixes, not mortar or joint work.

Answer

How many yards do I need for a small patio joint fill?

At a 1 inch depth, one cubic yard covers about 324 square feet, so most patio joint jobs need well under a full yard. Measure the total joint area, not the whole patio, since you are only filling the gaps between pavers, not the full surface.

Answer

When is the best time to do sand and mortar work in Starkville?

Spring through fall is peak hardscape season here, once you are past the last frost around March 27 and before the first frost near November 5. Mortar cures poorly in freezing temperatures, so avoid mixing on cold mornings in late fall or winter.

Answer

Where will the truck place the sand pile?

The driver places the pile at a driveway or curbside spot with clear truck access, delivery is scheduled at checkout so you can plan around it. Make sure the drop area is clear beforehand, since the load is dumped as a pile rather than spread across your site.

Answer

Should I use mason sand or chip stone for my paver base?

Mason sand works for jointing and mortar, but many builders now use chip stone for paver bedding because it locks in place and will not pump out from under the pavers over time. If your project is strictly mortar mixing or joint fill, mason sand is still the right call.

More delivery around Starkville, Mississippi

All Starkville, Mississippi landscape supply