About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and joint work only needs a 1 to 2 inch layer, so a yard or two handles a typical patio or wall project. Pool base work usually calls for a thin, even layer rather than a deep fill, so measure your footprint before ordering extra. Because it is sold by the cubic yard, it pays to calculate the actual square footage of joints or base area rather than guessing.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Succasunna Sand Delivery

Succasunna Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar and joint work only needs a 1 to 2 inch layer, so a yard or two handles a typical patio or wall project. Pool base work usually calls for a thin, even layer rather than a deep fill, so measure your footprint before ordering extra. Because it is sold by the cubic yard, it pays to calculate the actual square footage of joints or base area rather than guessing.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Succasunna Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most jobs using this sand also need paver base gravel or chip stone for bedding, since chip stone is increasingly replacing sand under pavers because it does not pump or wash out. If you are doing mortar work, order it alongside your stone or brick delivery so the crew is not waiting mid job. Pool installers often pair it with a compactable base material underneath.

Mulch Mound Pro Tip

For mortar mixing, do not substitute concrete sand even if you have some left over from a base project. The larger, less uniform particles make mortar harder to trowel and weaker once cured. This washed and finely screened sand is what gives mortar its workability, especially important on stone wall repairs common near the older Morris Canal era construction in town where matching original mortar texture matters for appearance.

Mulch Mound Pro Tip

A common mistake is ordering sand for paver bedding out of habit. Chip stone has largely replaced sand for that use because sand pumps up through joints over time, especially after freeze thaw cycles that Succasunna sees each winter at zone 6b. Reserve sand for joint filling and mortar, and use chip stone underneath the pavers themselves for a base that holds its shape longer.

Mulch Mound Pro Tip

If you are running both a mortar job and a joint filling job, order your sand in one delivery rather than two separate small orders. It stores fine under a tarp for a few weeks if your project timeline stretches into fall before the first frost around October 10, so there is no rush to use it all immediately once it arrives.

Working With Sand in Succasunna

Succasunna sits on sandy loam already, so this material is not for amending planting beds, it is a construction sand for specific jobs. Local masons working on stone walls near the Morris Canal Historic Corridor use it for mortar mixing where consistency matters more than cost. Pool installers use it for base leveling before liner installation, and paver crews still spec it for joint filling even as chip stone takes over bedding work. In this climate, spring through fall is when most of these projects actually happen.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this washed and finely screened sand is what is commonly called mason sand in some regions. It is finer and more uniform than concrete sand, which is why it works well for mortar mixing and paver joints where a rougher sand would be harder to trowel or pack evenly.

Answer

How many cubic yards do I need for a paver patio's joints?

Joint filling uses very little material since it is only filling gaps, not covering the whole surface. Estimate based on your patio's total square footage and a shallow depth, most residential patios need well under a full cubic yard for joints alone, though we deliver by the yard so plan around your minimum order.

Answer

When should I schedule this for a pool base installation?

Spring through fall is when most pool installers in this area are working, since ground conditions are more workable and there is no frost to deal with. Aim to have your base sand delivered right before your liner and wall installation crew arrives so it does not sit exposed to rain and lose its even grade.

Answer

Where will the sand be placed on delivery day?

The truck places the load wherever you direct at delivery, typically a driveway or a spot close to the work area since sand is heavy to shovel long distances. Make sure the path is clear and wide enough for the truck beforehand, and let us know at checkout if access is tight.

Answer

Should I use this sand or chip stone under my pavers?

For bedding under pavers, chip stone is now generally preferred because it locks together and does not pump or wash out the way sand can over time. Save this sand for joint filling between pavers and for mortar work, where its fine, uniform texture is actually the right tool for the job.

More delivery around Succasunna, New Jersey

All Succasunna, New Jersey landscape supply