• Tallahassee FL Sand Delivery - Mulch Mound
  • Tallahassee FL Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches, so a single yard goes further than people expect. For a typical patio joint fill or a small mortar batch, half a yard to a yard usually covers a residential job. Larger pool base or multi patio projects should plan closer to 2 to 3 yards depending on square footage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Tallahassee Sand Delivery

Tallahassee Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, and most mortar or paver joint work only needs 1 to 2 inches, so a single yard goes further than people expect. For a typical patio joint fill or a small mortar batch, half a yard to a yard usually covers a residential job. Larger pool base or multi patio projects should plan closer to 2 to 3 yards depending on square footage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Tallahassee Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most jobs pairing this sand also need paver base gravel underneath and edge restraint to lock the pattern in place once the joints are filled. If you are mixing mortar on site, having a clean spot to stage both the sand and cement bags makes the work go faster. Some crews are shifting to chip stone for paver bedding instead of sand since it resists pumping, worth asking about if that is your project.

Tallahassee Soil Delivery
Tallahassee Mulch Delivery
Map of the sand delivery area around Tallahassee, Florida

Service area

Areas we deliver sand in Tallahassee, Florida

See All Locations
Mulch Mound Pro Tip

Tallahassee's sandy loam drains fast, but that does not mean skip the base work under pavers. If you are using this sand as bedding rather than just joint fill, screed it to an even 1 inch and compact lightly before setting pavers, otherwise you will get settling in low spots within a season, especially after the summer rains that hit this area from June through September.

Mulch Mound Pro Tip

A common mistake is buying concrete sand when the job calls for mason sand, or the reverse. Mortar mixing needs the finer, more uniform grain of mason sand for workability, while general fill or leveling can tolerate coarser material. Check what your project actually calls for before ordering, mixing the two on one job usually shows up as inconsistent color or texture in the finished mortar joints.

Mulch Mound Pro Tip

If your project includes both a paver patio and a mortar based feature like a fire pit or retaining wall cap, order enough sand for both in one delivery rather than two smaller runs. It also pairs naturally with polymeric sand for the final joint sweep on patios, though that is usually a separate bagged product added after the base fill sets.

Working With Sand in Tallahassee

Tallahassee sits on sandy loam already, so this material is not fighting your native soil, it is refining it for a specific task like a mortar mix or a paver bed. With a growing season that runs long here, from last frost in mid March to first frost in mid November, hardscape crews have a wide window to pour patios and set pavers before winter. Humidity through the summer months makes proper compaction and drainage under paver bases matter more than it would in a drier climate. Because this sand is finer and more uniform than concrete sand, it is not meant for broad fill work, it is meant for the joints and the mix.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand for my yard?

No, mason sand is washed and finely screened specifically for mortar mixing and paver joints, it is not meant for general fill or grading work. If you need bulk fill for leveling a yard, a coarser fill sand or topsoil blend is a better fit than this material.

Answer

How many cubic yards do I need for a paver patio in Tallahassee?

One cubic yard covers about 324 square feet at 1 inch, which is the typical depth for joint fill or bedding. For a 300 square foot patio, plan on roughly one yard, and add a bit more if your joints are wider than average or you are also mixing mortar for edging.

Answer

When is the best time of year to do paver work here?

Spring through fall is peak hardscape season in Tallahassee, running from around last frost in mid March through first frost in mid November. Summer humidity and rain can slow curing on mortar work, so many crews prefer spring or early fall for mortar heavy projects and save simple paver setting for any time in that window.

Answer

Where will the sand be dropped on my property?

Delivery is placed at the curb, driveway, or another accessible spot you specify, our driver does not haul material further onto the property. Make sure the drop zone is clear and reachable by a delivery truck before your scheduled date, which you pick at checkout.

Answer

Should I use sand or chip stone under my pavers?

Traditional mason sand bedding is being replaced by clean chip stone in a lot of paver installs because chip stone does not pump or wash out under repeated freeze thaw or heavy rain, which matters given Tallahassee's wet summers. Sand still makes sense for mortar mixing and joint fill, but ask your installer which they recommend for the base layer specifically.”}

More delivery around Tallahassee, Florida

All Tallahassee, Florida landscape supply