• Terryville NY Sand Delivery - Mulch Mound
  • Terryville NY Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, which is the standard install depth for mortar work, paver joints, and pool base prep, this material typically goes down at 1 to 2 inches, not deeper. For a small patio joint job or a single pool base, a half yard to one yard is usually enough. Larger hardscape jobs, figure your square footage first, then work backward from the 324 square foot figure.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Terryville Sand Delivery

Terryville Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, which is the standard install depth for mortar work, paver joints, and pool base prep, this material typically goes down at 1 to 2 inches, not deeper. For a small patio joint job or a single pool base, a half yard to one yard is usually enough. Larger hardscape jobs, figure your square footage first, then work backward from the 324 square foot figure.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Terryville Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most jobs that call for this sand also need pavers, chip stone, or bagged mortar mix on hand before the crew starts. If you are doing a pool base, gravel for drainage underneath is worth having delivered at the same time. Ask about chip stone if you are still deciding between traditional sand joints and the newer no pump approach.

Terryville Soil Delivery
Terryville Mulch Delivery
Map of the sand delivery area around Terryville, New York

Service area

Areas we deliver sand in Terryville, New York

See All Locations
Mulch Mound Pro Tip

If you are mixing mortar in Terryville during the summer humidity, hold back a little extra water at first, since this washed sand can carry surface moisture from the yard even after it looks dry. Add water gradually until the mix holds a peak without slumping. This matters more here than in drier inland climates because the North Shore's humidity keeps sand damper longer than the bag or pile might suggest at a glance.

Mulch Mound Pro Tip

A common mistake with paver joint sand near the coast is assuming it locks in place permanently. It does not, and rain plus freeze thaw cycles through a Zone 7a winter will wash or heave it out over a season or two. Plan to top off joints every year or two, ideally before the spring hardscape rush hits, rather than waiting until gaps are visible and weeds move in.

Mulch Mound Pro Tip

If you are torn between traditional sand and chip stone for paver joints, factor in long term labor, not just the delivered material. Sand needs periodic refilling as noted above, while chip stone locks tighter and resists washout, which can mean fewer callbacks on a job. For mortar and pool base work though, this sand is still the right call, chip stone is not a substitute there.

Working With Sand in Terryville

Terryville sits on sandy loam already, so this material is not fighting your native soil, it is doing a specific job on top of it. Masons here use it to keep mortar workable in both the humid summer stretch and the drier fall push before frost hits October 27. Pool installers use it to true up a base before liner day. If you are bedding pavers, know that a lot of local crews have shifted to clean chip stone instead, since it does not pump moisture up through the joints the way sand can.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is the finely screened, washed sand often called mason sand in other regions. It is uniform and fine enough to keep mortar workable, which is different from coarser concrete sand or bedding sand. If your project is mortar mixing, paver joints, or a pool base, this is the correct product.

Answer

How much sand do I need for a small patio joint job?

At the standard 1 inch fill depth, one cubic yard covers about 324 square feet, so most patios under a few hundred square feet need well under a full yard. Measure your paver area, not the whole yard, since joints only take a thin fraction of that footprint. A half yard covers most residential patios with room to spare.

Answer

When is the best time to have this delivered in Terryville?

Hardscape and pool projects here run heaviest from spring through fall, roughly April through October before the first frost. Delivering in that window avoids working the material into cold, damp ground. If you are doing mortar work, aim for stretches with less humidity swing for easier mixing.

Answer

Where does the truck place the load on delivery day?

The driver places the load wherever you designate at checkout, typically a driveway, curb, or other clear access point. Make sure the path is free of low branches, parked cars, or narrow gates beforehand, since this is a bulk delivery, not a bag drop, and the truck needs reasonable clearance.

Answer

Should I use this sand or chip stone for my paver joints?

It depends on how much upkeep you want. Traditional sand is the classic choice but it washes and heaves over time, especially through freeze thaw winters here. Chip stone is increasingly used instead because it locks in place and does not pump. For mortar mixing or pool bases, though, sand remains the standard, chip stone is not appropriate there.

More delivery around Terryville, New York

All Terryville, New York landscape supply