About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for paver joints and mortar work. For a pool base or a mortar mixing job, figure your square footage first, then divide by 324 to get yards needed at 1 inch, or 162 for 2 inches. Most residential jobs in Victorville, patios, small walls, pool decks, land somewhere between 1 and 4 yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Victorville Sand Delivery

Victorville Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Ordered Dirt. Received Dirt. Would Buy Again.

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, or half that at 2 inches, which is the typical range for paver joints and mortar work. For a pool base or a mortar mixing job, figure your square footage first, then divide by 324 to get yards needed at 1 inch, or 162 for 2 inches. Most residential jobs in Victorville, patios, small walls, pool decks, land somewhere between 1 and 4 yards.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Victorville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Pair this sand with paver base gravel underneath and polymeric or joint sand on top if you're setting a patio, or with cement and gravel if you're mixing mortar on site. Some crews around Victorville are shifting to clean chip stone for paver bedding since it does not pump the way fine sand can under repeated freeze thaw or heavy foot traffic. Either way, having the sand and the base material delivered together saves a second trip.

Mulch Mound Pro Tip

In Victorville's dry heat, mortar made with this sand sets faster than you'd expect once mixed, so mix in smaller batches during summer afternoons rather than one big batch that starts curing before you've placed it. Keep a damp cloth over your mix bucket between uses. If you're working block walls in July heat, morning starts before the sun is direct will give you more workable time per batch.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using this sand as bedding under high traffic areas like driveways, where it can migrate or pump over time, especially with the seasonal temperature swings between summer highs and winter nights near frost. Chip stone bedding holds up better under vehicle weight. Save this finer sand for mortar work, pool bases, and joint filling where its uniform grain size actually matters.

Mulch Mound Pro Tip

Since this material is sold and priced by the cubic yard, over ordering wastes money and under ordering means a second delivery fee. Round up slightly, maybe 10 percent, for waste and compaction rather than guessing high. If you're doing both a mortar job and a paver joint fill, order them as one delivery since both draw from the same sand and splitting the order gains you nothing.

Working With Sand in Victorville

Victorville sits on sandy loam that drains fast and holds almost no structure on its own, which is fine for native landscaping but not what you want under pavers or in a mortar mix. This sand gives you a predictable, uniform base that does not shift the way native fill does once the desert heat dries it out. With hot summers and mild winters here, most concrete and hardscape work happens in spring and fall when crews are not fighting surface temperatures. High Desert building tends to favor block and paver construction over wood framing details, so mason sand sees steady use on retaining walls, block walls, and patio bases around town.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, mason sand is the common name for this washed, finely screened sand in many regions, and that is exactly what this product is. It is finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and clean for pool bases and paver joints.

Answer

How many yards do I need for a pool base?

Measure your pool footprint in square feet, then divide by 324 for a 1 inch depth or by 162 for 2 inches, which is the typical range for pool base work. A standard 15 by 30 foot above ground pool area, about 450 square feet, needs roughly 1.5 to 3 cubic yards depending on depth.

Answer

When is the best time to do sand and mortar work in Victorville?

Spring and fall are best, since summer surface heat can dry mortar too fast to work with and winter nights can dip near frost, which affects cure time. Most hardscape crews here schedule block, paver, and patio work outside the peak summer months for exactly this reason.

Answer

Can the delivery truck reach my backyard?

The truck places the load at your driveway or curb, it cannot drive across lawn or existing landscaping. If your project is in the backyard, plan on wheelbarrowing or using a small loader to move sand from the drop point, and clear that path before delivery day.

Answer

Should I use this sand or chip stone under my pavers?

For mortar mixing and pool bases, this sand is the right choice due to its fine, uniform grain. For paver bedding under driveways or high traffic patios, many contractors now prefer clean chip stone since it resists pumping and shifting better over time than fine sand does.

More delivery around Victorville, California

All Victorville, California landscape supply