About this fill dirt

Inorganic subsoil for filling holes, raising low ground, and backfill. Small rocks and bits of stick or root are normal in the mix, this is structural material and not a growing medium. Do not use it to level a lawn surface or fill flower beds, put topsoil over it for anything you want to plant. Place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a 10 by 10 foot low spot needs roughly two yards to bring it level. For deeper fills, like backfilling around a foundation or pool wall, figure your cubic footage first, then convert to yards, since this material compacts in 6 to 8 inch lifts rather than going in all at once.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Wentzville Fill Dirt Delivery

Wentzville Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Inorganic subsoil for filling holes, raising low ground, and backfill. Small rocks and bits of stick or root are normal in the mix, this is structural material and not a growing medium. Do not use it to level a lawn surface or fill flower beds, put topsoil over it for anything you want to plant. Place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, so a 10 by 10 foot low spot needs roughly two yards to bring it level. For deeper fills, like backfilling around a foundation or pool wall, figure your cubic footage first, then convert to yards, since this material compacts in 6 to 8 inch lifts rather than going in all at once.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Wentzville Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill dirt jobs finish with a topsoil cap once the fill is compacted, since fill dirt itself is not meant to grow anything. If you are leveling a low area that will see grass again, pair your order with topsoil and possibly compost to rebuild a workable planting layer on top.

Mulch Mound Pro Tip

Wentzville's clay soil does not forgive dumped, uncompacted fill. Spread it in lifts of 6 to 8 inches and compact each layer with a plate compactor or hand tamper before adding the next. Skipping this step is the number one reason yards here develop sunken patches two or three years later, especially around foundations where water tends to collect and soften loose fill from underneath.

Mulch Mound Pro Tip

A common mistake is treating fill dirt as a finished surface. It has no organic matter and compacts hard, so nothing grows well directly in it. Once your fill is compacted to grade, cap it with 4 to 6 inches of real topsoil before seeding or sodding. Skipping the cap layer means thin, patchy grass no matter how much fertilizer you put down afterward.

Mulch Mound Pro Tip

If you are filling a large low area, order fill dirt for the bulk of the depth and save topsoil for just the top few inches, rather than paying to move topsoil volume that will just get buried. This split keeps your project on budget and still gives you a real growing layer where it matters, right at the surface.

Grading and Filling in Wentzville

Wentzville sits on clay soil that holds water and settles unevenly, which is why so many yards here develop low spots near foundations, patios, and pool decks over time. Fill dirt gives you a structural base to correct that grading before it turns into standing water or a cracked slab. With Quail Ridge Park and similar developments nearby built on graded lots, a lot of the fill work around town is backfill against retaining walls or leveling before a shed or patio goes in. This is a build-up material, not a planting bed, so plan to cap it with topsoil wherever grass or landscaping needs to grow.

What Fill Dirt Is

Fill dirt is inorganic subsoil sold for volume and grade, not for growing. Small rocks and bits of stick or root are normal in the mix. It compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Wentzville?

Yes, fill dirt is the right material for building up low areas across a yard, especially with our clay soil that holds water and creates uneven ground. Spread and compact it in 6 to 8 inch lifts rather than one thick layer, and plan to cap the finished grade with topsoil before reseeding.

Answer

How many cubic yards of fill dirt do I need for my project?

One cubic yard covers about 54 square feet at a 6 inch depth. Measure your area's length and width, decide your fill depth, and calculate cubic yards from there. For a 200 square foot spot at 6 inches, expect to need close to 4 cubic yards, plus a bit extra for compaction settling.

Answer

When is the best time to bring in fill dirt around Wentzville?

Fill dirt is project driven rather than seasonal, so it works any time the ground is not frozen or saturated. That said, working before our first frost in late October or after the ground thaws past mid April tends to make compaction easier, since frozen or waterlogged clay does not pack down evenly.

Answer

Where will the delivery truck place the fill dirt?

The truck places your load wherever you specify, typically a driveway or the spot closest to your work area that it can safely access. Clear a path wide enough for a delivery truck and mark the exact drop spot, since fill dirt is heavy and not something you want to move twice.

Answer

Should I get fill dirt or topsoil for my low spot?

Use fill dirt for the bulk of the depth, since it is denser and meant for structural buildup, then cap the top 4 to 6 inches with topsoil if grass or plants need to grow there. Using topsoil alone for a deep fill wastes money and often settles unevenly since it lacks the density fill dirt has.much this is the answer.

More delivery around Wentzville, Missouri

All Wentzville, Missouri landscape supply