• Williamsport PA Sand Delivery - Mulch Mound
  • Williamsport PA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Donna Nedrow
Donna Nedrow
Google Review

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, so a small paver patio or mortar job for a brick repair often needs less than a full yard. For mortar mixing or pool base work, figure your depth first, most jobs run 1 to 2 inches, then order by the cubic yard rather than guessing bags, since bulk sand is more consistent and cheaper per square foot once you clear a couple hundred square feet.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Williamsport Sand Delivery

Williamsport Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Donna Nedrow
Donna Nedrow
Google Review

Great service. We ordered topsoil from Mulch Mound and the best experience. Thank you so much!

One cubic yard of mason sand covers about 324 square feet at a 1 inch depth, so a small paver patio or mortar job for a brick repair often needs less than a full yard. For mortar mixing or pool base work, figure your depth first, most jobs run 1 to 2 inches, then order by the cubic yard rather than guessing bags, since bulk sand is more consistent and cheaper per square foot once you clear a couple hundred square feet.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Williamsport Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Jana Ozanich
Jana Ozanich

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked ...

Read full review

One of the easiest customer service experiences I've had in a long time! Mulch Mound made it so simple. After putting it off for a while, I looked at the weather and knew I needed to get to mulching ASAP before the rain came if I didn't want to wait another week. I put my order in for the next day online and they came right at 9 AM. The employee who dropped off the mulch did a great job, putting it right on the tarp I laid out, she even made sure none of it got on the yard and double checked the truck bed to make sure it all came out. The mulch was exactly what I needed and arrived right on time.

Google Review
Michelle Cooper
Michelle Cooper

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering...

Read full review

We have always spread our own mulch for the past 24 years. This was our first time with the Mulch Mound - things I liked: they have online ordering and provide a digital receipt which means you can remember how much you ordered (I always forget for the next year!), they were on time, they were able to deliver in 48 hours, they were generous with the portion (we got 9 yards and it felt like a FULL nine yards!), the driver was polite! We have ordered from reputable places, and there is always a little trash in the mulch. The mulch we recv'd from Mulch Mound had barely any... we were pleasant surprised!!! Color was great! Not to mention - the price was competitive and LOWER than other mulch places around. We will use again !! Highly recommend! Thanks Mulch Mound!

Google Review

Complete Your Outdoor Project

Mason sand is usually just one layer of a bigger build. Pair it with paver base gravel underneath for structural support, or with chip stone if you are doing a modern paver install, since chip stone has replaced sand bedding on a lot of jobs because it will not pump out from under the pavers. If you are mixing mortar, you will also want portland cement on hand before the load arrives.

Williamsport Soil Delivery
Williamsport Mulch Delivery
Mulch Mound Pro Tip

Mason sand works best for mortar when it is kept dry until mixing, since Williamsport's humid summers and wetter shoulder seasons can cause bagged or piled sand to clump if left uncovered. Tarp your pile if rain is forecast within a few days of your project. For paver joints, damp sand actually compacts better into the joints than bone dry sand, so a light misting before sweeping it in helps it settle without washing out.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using mason sand as the bedding layer under the pavers instead of just in the joints. Mason sand is finer than concrete sand and it does not lock in place the same way, so it can pump up between pavers after freeze thaw cycles. Many installers in this region have switched to clean chip stone for the bedding layer specifically because it resists that pumping, and save the mason sand for joint filling and mortar work only.

Mulch Mound Pro Tip

If you are doing both a mortar job and a paver project, order your mason sand as one combined delivery rather than two separate loads, since a single cubic yard drop covers most residential mortar needs with plenty left for joint sand. Keep any leftover sand covered and dry under a tarp, it stores fine for future small repairs like tuckpointing on older brick homes common around the city's downtown blocks.

Working With Sand in Williamsport

Williamsport sits on silt clay loam, which drains slower than sandy soil and holds moisture through the shoulder seasons. That matters for hardscape work because a wet subgrade under pavers or a patio slab will shift over time if you do not manage drainage first. Mason sand does not fix a clay base, but it gives you a clean, workable bedding or mortar mix that will not fight you the way local clay-heavy fill does. With last frost around May 6 and first frost by October 15, most masonry and paver work here happens in that window when the ground is workable.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as the sand you'd use for a sandbox or general fill?

No, mason sand is washed and finely screened specifically for mortar mixing and paver joints, giving it a more uniform texture than play sand or fill sand. It is not meant for structural bedding under heavy loads. If you need fill or leveling material for a larger area, a coarser sand or gravel product is a better fit.

Answer

How much mason sand do I need for a small paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, which is more than enough joint sand for most residential patios, since joints only need a light fill rather than a full inch across the whole surface. Most homeowners order a half yard to a full yard depending on patio size and whether they are also mixing mortar for edging.

Answer

When is the best time of year to do masonry work in Williamsport?

Spring through fall is the practical window here, roughly after the last frost around May 6 and before the first frost around October 15. Mortar cures poorly in freezing temperatures, and paver base work is easiest when the ground is not frozen or saturated from spring thaw, so late spring through early fall tends to give the most reliable results.

Answer

Can the delivery truck get into a tight residential driveway?

In most cases yes, but access depends on your driveway width, overhead clearance, and how close we can get to your drop zone. Let us know at checkout if you have a narrow driveway, low branches, or a shared alley, and we will place the load as close to your work area as the truck can safely reach.

Answer

Should I use mason sand or chip stone under my pavers?

For the bedding layer under pavers, many installers now prefer chip stone since it locks together and resists pumping out over time, especially through freeze thaw cycles common in this area. Mason sand is still the right choice for filling the joints between pavers once they are set, so a lot of jobs actually use both materials for different parts of the same project.

More delivery around Williamsport, Pennsylvania

All Williamsport, Pennsylvania landscape supply