About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, so a small patio or walkway job often only needs a fraction of a yard, while a pool base or a full paver bed can run one to two yards depending on square footage. Since typical install depth for this material is just 1 to 2 inches, most residential jobs in Worcester are ordering less volume than they expect and are better off double checking square footage before rounding up.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Worcester Sand Delivery

Worcester Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, so a small patio or walkway job often only needs a fraction of a yard, while a pool base or a full paver bed can run one to two yards depending on square footage. Since typical install depth for this material is just 1 to 2 inches, most residential jobs in Worcester are ordering less volume than they expect and are better off double checking square footage before rounding up.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Worcester Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Sand pairs naturally with paver base gravel underneath and polymeric jointing sand or stone dust on top, depending on what the project calls for. If you are pointing brick on an older Worcester home, you will also want your mortar mix components ready before the load lands. A tarp down on the driveway or work area saves cleanup either way.

Mulch Mound Pro Tip

If you are bedding pavers, know that a lot of contractors have moved away from sand entirely for that layer and toward clean chip stone, because sand under pavers can pump out over time with freeze thaw cycles, which Worcester gets plenty of. Mason sand still earns its keep in mortar and joint work where its fine, uniform grain is what makes the mix workable, but for bedding think about whether chip stone fits your project better.

Mulch Mound Pro Tip

Don't let this sand sit uncovered through a Worcester rain before you use it. It will still work wet, but wet sand throws off your mortar ratios if you are eyeballing water content, and it takes longer to dry back out once fall humidity sets in. Tarp the pile if the job stretches past a day or two.

Mulch Mound Pro Tip

Order slightly less than your calculated volume if the project is mortar joints or paver joints, since it is spread thin and a little goes a long way, then add a partial order later if needed. Overordering sand for thin applications is one of the more common ways people end up with a leftover pile taking up space in the yard through winter.

Working With Sand in Worcester

Worcester's silty loam holds moisture and does not drain the way sandy soil does, which is part of why masons here lean on true mason sand for mortar rather than trying to stretch a bag mix. Hardscape work in this city runs spring through fall, with a hard stop once the ground starts working toward that October 10 frost. At 480 feet with a real winter freeze thaw cycle, joint sand and bedding sand both need to be placed while the base can still be compacted properly, not rushed in late as the weather turns. A lot of the paver work we deliver for here is repair and reset jobs on older patios where the original bedding shifted over the years.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, which is what mason sand refers to in most regions. It is finer and more uniform than concrete sand, which is why it works into a mortar mix cleanly and is the standard choice for masonry and paver joint work.

Answer

How much sand do I need for a small patio?

At a 1 inch bedding depth, one cubic yard covers about 324 square feet, so a typical 150 to 200 square foot patio usually needs well under a full yard. Measure your actual square footage first, since this material is applied thin and it is easy to order more than the job requires.

Answer

When should I schedule this for a paver or masonry job in Worcester?

Spring through fall is when most hardscape work happens here, and you want the ground workable and the base able to compact properly, which gets harder as you approach the October 10 first frost. Plan mortar and joint work with enough runway before cold weather sets in for the season.

Answer

Where will the sand be placed on delivery day?

Wherever you tell us, driveway, curb, or a staging spot on the property, and you set the delivery date at checkout rather than waiting on a window. Just make sure the drop spot is clear and accessible, since a loaded truck needs decent clearance to unload.

Answer

Should I use sand or chip stone for paver bedding?

Sand has been the traditional choice, but many contractors now use clean chip stone for paver bedding because it does not pump out over time the way sand can under freeze thaw stress. For mortar mixing and paver joints, though, this fine washed sand is still the right material.

More delivery around Worcester, Massachusetts

All Worcester, Massachusetts landscape supply