About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will be a return customer for sure.

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most jobs call for 1 to 2 inches depending on whether you're bedding pavers, mixing mortar, or laying a pool base. For mortar work, figure your total mix volume needs rather than a spread depth, since it's blended with cement and lime, not laid flat. Order by the cubic yard and round up slightly, running short mid pour is worse than having a little extra on site.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Amarillo Sand Delivery

Amarillo Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will be a return customer for sure.

One cubic yard of this sand covers about 324 square feet at a 1 inch depth, and most jobs call for 1 to 2 inches depending on whether you're bedding pavers, mixing mortar, or laying a pool base. For mortar work, figure your total mix volume needs rather than a spread depth, since it's blended with cement and lime, not laid flat. Order by the cubic yard and round up slightly, running short mid pour is worse than having a little extra on site.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Amarillo Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most patio and paver jobs that need mason sand also need base gravel or crushed rock underneath for compaction and drainage. If you're setting stone or block, plan on cement and lime alongside the sand for your mortar mix. Pool installers often pair it with a layer of crushed stone below the sand base for extra stability.

Map of the sand delivery area around Amarillo, Texas

Service area

Areas we deliver sand in Amarillo, Texas

Mulch Mound Pro Tip

Amarillo's dry air and wind pull moisture out of a sand pile fast, which matters more for mortar than most people realize. Mortar sand needs to hold a certain dampness to bind properly with cement, so if your pile has been sitting uncovered for a day or two in our wind, wet it down before mixing. A tarp over the pile between pours saves you from guessing at water ratios every batch.

Mulch Mound Pro Tip

A common mistake on paver jobs here is using mason sand as the bedding layer under the pavers themselves. It's too fine and uniform for that role now, most installers have shifted to clean chip stone for bedding because it locks in place and doesn't pump moisture up through the joints during freeze thaw cycles. Save the mason sand for the joint fill on top, not the base underneath.

Mulch Mound Pro Tip

If you're building a patio or wall this season, order your mason sand and your base gravel in the same delivery when possible, it saves a second trip charge and gets everything staged on site together. Spring and fall are Amarillo's busiest hardscape stretches, so ordering a few days ahead of your planned start keeps your project on schedule instead of waiting on material.

Working With Sand in Amarillo

Amarillo sits on sandy loam already, so this material is not fighting your native soil, it is a construction input for specific jobs. With Cadillac Ranch drawing steady tourist traffic and a building scene that leans hard into patios, driveways, and outdoor living spaces, mason sand shows up constantly in mortar mixes for stone and block work. Pool installers around the city also use it as a smooth, compactable base layer before the liner goes down. High elevation and dry air here mean the sand stays workable longer before it sets up in a mix, which crews appreciate.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for on a typical Amarillo project?

It's mainly used for mixing mortar when setting stone, block, or brick, filling joints between pavers, and as a smooth base layer under pool liners. It's finer and more consistent than concrete sand, which is what makes it workable for masonry. It is no longer commonly used as paver bedding here since chip stone has replaced it for that purpose.

Answer

How many cubic yards do I need for a paver patio?

One cubic yard covers about 324 square feet at a 1 inch depth, so for joint filling on a standard patio you typically need less than a full yard unless the patio is large. Measure your patio's square footage first, then figure roughly 1 inch of sand into the joints across that area to estimate your order.

Answer

Does Amarillo's dry climate affect how I install or store the sand?

Yes, the wind and low humidity here dry out an uncovered pile quickly, which affects mortar workability more than joint filling. Keep the pile covered with a tarp if it will sit more than a day before use, and expect to add a bit more water than a mortar recipe from a humid climate would suggest.

Answer

Where will the sand be dropped and do I need to be home?

The driver places the load wherever you direct on your property, usually a driveway or the flattest spot near your work area. You'll schedule the delivery date at checkout, and it helps to have the drop zone cleared and accessible beforehand so the driver isn't guessing where to unload.

Answer

Should I use mason sand or chip stone under my pavers?

For paver bedding, most installers now use clean chip stone instead of mason sand because it locks together and doesn't pump moisture through the joints during freeze thaw. Save mason sand for mortar mixing, joint fill, and pool bases, where its fine, uniform texture is actually the right fit for the job.

More delivery around Amarillo, Texas

All Amarillo, Texas landscape supply