• Bryan TX Fill Dirt Delivery - Mulch Mound
1 1
Bryan Fill Dirt Delivery

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of this fill dirt covers about 54 square feet at a 6 inch depth, and most jobs here run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and order by the cubic yard rather than guessing with bags. For anything over a couple yards, delivery is the practical way to get it done in one trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Bryan Fill Dirt Delivery

Bryan Fill Dirt Delivery

4.7
137 reviews
$38.00 per Yard
$38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Brachie Zehnwirth
Brachie Zehnwirth
Google Review

I have ordered twice now, a pleasure to deal with, easy and fast delivery, beautiful mulch!

One cubic yard of this fill dirt covers about 54 square feet at a 6 inch depth, and most jobs here run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and order by the cubic yard rather than guessing with bags. For anything over a couple yards, delivery is the practical way to get it done in one trip.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Bryan Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review

Complete Your Outdoor Project

Most fill dirt jobs finish with a cap of topsoil once the grade is where you want it, since fill dirt alone will not support grass or plants. If you are leveling before a patio or shed pad, a layer of crushed base on top of the compacted fill gives you a firmer surface to build on. Either pairing keeps the structural work and the growing layer doing their separate jobs.

Bryan Soil Delivery
Bryan Mulch Delivery
Mulch Mound Pro Tip

Bryan's clay loam does not forgive shortcuts on compaction. Place this fill dirt in lifts of 6 to 8 inches and compact each one before adding the next, rather than dumping the whole depth at once and tamping the top. Skipping this step is why driveways and patios built on uncompacted fill sink unevenly within a year or two, especially after our wetter spring stretches soften everything underneath.

Mulch Mound Pro Tip

Do not plant or seed directly into this material, it is subsoil, not topsoil, and it lacks the organic matter anything needs to root well. Once your fill is compacted to grade, cap it with 4 to 6 inches of actual topsoil before you seed, sod, or landscape. Skipping the cap is the most common mistake we see, and it usually means redoing the work within a season.

Mulch Mound Pro Tip

If you are filling a large low area, order the full volume in one delivery instead of staging smaller loads over several weeks. One trip means one compaction schedule and one settling period, rather than fighting inconsistent density across a yard that got filled in batches. It also means less repeated site access across your lawn or driveway while the ground is trying to recover from clay loam's slow drainage.

Grading and Filling in Bryan

Bryan sits on clay loam that already holds water longer than sandy soils, so low spots around the yard tend to stay soggy well after a storm passes through. Fill dirt is what people here use to raise those areas above the surrounding grade before anything else gets built or planted. It also shows up constantly around foundation work and pool decks near Downtown Bryan, where older lots have settled unevenly over the years. Because it is a structural material, it works with the clay rather than fighting it once it is compacted in properly.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Bryan?

Yes, fill dirt is exactly what's used for that, but it needs to go down in compacted lifts of 6 to 8 inches rather than one thick layer, especially given how our clay loam holds moisture. If grass or landscaping is the end goal, plan to cap the compacted fill with topsoil before seeding or sodding.

Answer

How many cubic yards do I need to raise a 500 square foot low spot by 6 inches?

At 54 square feet of coverage per cubic yard at a 6 inch depth, 500 square feet needs roughly 9 to 10 cubic yards. If you're going deeper than 6 inches anywhere in that area, add proportionally more, and it's worth rounding up slightly since low spots are rarely perfectly flat.

Answer

When is the best time to bring in fill dirt around here?

Fill dirt work is driven by the job, not the season, so there's no wrong time of year to order it. That said, working before our first frost around late November or after the wettest spring weeks gives you drier ground to compact against, which makes the lifts settle more predictably.

Answer

Will the delivery truck be able to access my property?

Most residential driveways and gated yards work fine, but the truck needs a clear path and enough turning room to dump the load where you want it. Let us know about tight access, low branches, or narrow gates ahead of your scheduled delivery so we can plan the drop location accordingly.

Answer

Is fill dirt the same as topsoil, and which one do I need?

No, fill dirt is subsoil meant for structural filling and raising grade, while topsoil has the organic content needed to grow anything. If you're filling a low spot, foundation gap, or building up before construction, use fill dirt and cap it with topsoil only where plants or grass are going in on top.

More delivery around Bryan, Texas

All Bryan, Texas landscape supply