• Bryan TX Sand Delivery - Mulch Mound
  • Bryan TX Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicholas Thom
Nicholas Thom
Google Review

So Easy!
So Cheap!
So doing this again next year!

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical install depth for jointing and bedding work. Mortar mixing jobs use it by volume in the mix rather than spread across an area, so figure your yardage off your mix ratio instead of square footage for those projects. For paver joints or pool base prep, measure the square footage and use the 1 to 2 inch depth range to land on a yardage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Bryan Sand Delivery

Bryan Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicholas Thom
Nicholas Thom
Google Review

So Easy!
So Cheap!
So doing this again next year!

One cubic yard covers about 324 square feet at a 1 inch depth, which is the typical install depth for jointing and bedding work. Mortar mixing jobs use it by volume in the mix rather than spread across an area, so figure your yardage off your mix ratio instead of square footage for those projects. For paver joints or pool base prep, measure the square footage and use the 1 to 2 inch depth range to land on a yardage.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Bryan Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Tracy Bly
Tracy Bly

Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

Google Review
Eric Waller
Eric Waller

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a ni...

Read full review

The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.

Google Review

Complete Your Outdoor Project

Mason sand is usually the finishing piece on a hardscape job, paired with base rock or crushed stone underneath and pavers or brick on top. Some crews are shifting to clean chip stone for paver bedding instead of sand since it does not pump or shift under freeze thaw cycles, worth asking about if that is your project. For mortar work, you will still want this sand paired with cement and lime on site.

Bryan Soil Delivery
Bryan Mulch Delivery
Mulch Mound Pro Tip

Mason sand pulls moisture fast in Bryan heat once hardscape season ramps up in late spring. If you are mixing mortar on site, keep the pile covered with a tarp between batches so it does not dry out unevenly, which throws off your water ratio and weakens the mix. A dry, overheated batch sets too fast to tool properly, especially on brick repair work downtown.

Mulch Mound Pro Tip

A common mistake on paver jobs is using mason sand for bedding instead of jointing. It is fine and uniform, which is great for mortar, but as a bedding layer it can pump up through joints over time, especially with Bryan's clay loam moving underneath through wet and dry cycles. Many local crews now use chip stone for bedding and save mason sand strictly for joint fill and mortar mixing.

Mulch Mound Pro Tip

If your project spans both mortar work and paver joints, order everything in one delivery rather than splitting trips, since mason sand keeps fine and workable as long as it stays covered and dry. Buying by the cubic yard instead of bagged sand also cuts down on plastic waste and trips to the store, which matters on multi-day masonry jobs around older brick structures like those downtown.

Working With Sand in Bryan

Bryan sits on clay loam, which is dense and drains slowly, so masons and pool installers rely on mason sand as a controlled, predictable base material instead of trusting native soil. Around the Downtown Bryan Historic District, a lot of the brick and stone repair work still calls for traditional mortar mixes, which need this finer sand rather than coarser concrete sand. Hardscape work in Aggieland tends to run heaviest from spring through fall, before the heat peaks and after the last frost clears in early March. Because it is uniform and washed clean, it behaves consistently whether you are setting pavers or mixing mortar on site.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is mason sand the same as regular sand from a hardware store?

Not quite. Mason sand is washed and finely screened to a consistent grain size, which is what makes it workable for mortar and tight paver joints. Bagged sand from a hardware store is often coarser or less consistent, which can make mortar harder to trowel and cure evenly, especially in Bryan's heat.

Answer

How much mason sand do I need for a small patio joint fill?

One cubic yard covers about 324 square feet at a 1 inch depth, which is more than enough for joint filling on most residential patios. Measure your patio square footage, and since joint fill uses less material than a full bedding layer, you will likely need less than the full coverage figure suggests.

Answer

When is the best time to do mortar or paver work in Bryan?

Spring through fall is the busiest window here, once temperatures settle after the last frost around March 1 and before the first frost hits in late November. Extreme summer heat can dry mortar too fast, so many masons here work early mornings during peak summer to keep the mix workable.

Answer

Where will the sand be placed on delivery day?

The truck places your load wherever you direct, typically a driveway, side yard, or the spot closest to your work area. Bryan's clay loam soil holds moisture, so if the ground is soft after rain, plan for a hard surface like a driveway to keep the truck from leaving ruts.

Answer

Should I use mason sand or chip stone for my paver base?

Mason sand has traditionally been used for paver bedding, but many contractors are switching to clean chip stone since it does not pump or shift the way sand can under freeze thaw and moisture cycles. Mason sand still works best for joint filling and mortar mixing, where its fine uniform texture is an advantage rather than a liability.

More delivery around Bryan, Texas

All Bryan, Texas landscape supply