• Centennial CO Sand Delivery - Mulch Mound
  • Centennial CO Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, and most paver joint or mortar mixing jobs only need that inch to two inches max. For a typical Centennial patio project, figure your square footage, divide by 324, and round up rather than down since you don't want to run short mid pour on a Saturday. Sand is sold by the cubic yard here, not by the bag or ton, so measure your project area first.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

FAQs

Read all FAQs

Centennial Sand Delivery

Centennial Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 324 square feet at a 1 inch depth, and most paver joint or mortar mixing jobs only need that inch to two inches max. For a typical Centennial patio project, figure your square footage, divide by 324, and round up rather than down since you don't want to run short mid pour on a Saturday. Sand is sold by the cubic yard here, not by the bag or ton, so measure your project area first.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

A ton is 2,000 pounds of material. As a general guideline, one ton of rock covers roughly 100 square feet at 2 inches deep, depending on rock size and density.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Centennial Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Mason sand pairs with mortar mix, flagstone, and pavers on most Centennial patio and wall jobs. Some crews are shifting paver joints to clean chip stone instead of sand since it won't pump out under freeze thaw cycles, worth asking about if that's your project. For pool bases, a compacted road base underneath the sand layer gives you a stable, level start.

Centennial Soil Delivery
Centennial Mulch Delivery
Mulch Mound Pro Tip

At 5837 feet, Centennial's dry air pulls moisture out of mortar mixes faster than at sea level, so mix in smaller batches and keep your mason sand covered between uses. If it dries out before you spread it, workability drops and you'll end up adding water on the fly, which weakens the final mortar bond. Keep a tarp over the pile between work sessions, especially on windy spring days.

Mulch Mound Pro Tip

A common mistake on clay soil sites is skipping a compacted base layer under sand for paver joints or pool decks. Clay shifts with moisture and freeze thaw, and sand alone won't stabilize a soft subgrade. Always compact your base material first, then use the sand for its actual job, filling joints or leveling the top inch, not correcting a soft foundation underneath.

Mulch Mound Pro Tip

If you're doing paver joints, ask about chip stone before you commit to sand, since chip stone locks in place and resists the pumping and washout that sand joints can suffer during heavy spring rain or snowmelt runoff. Mason sand is still the right call for mortar mixing and pool base work, so many jobs end up ordering both materials rather than one or the other.

Working With Sand in Centennial

Centennial sits on heavy clay at 5837 feet, which is exactly why mason sand matters for drainage layers under patios and pool decks, since clay alone won't let water move. Hardscape crews here rely on it for mortar mixing and joint fill on the flagstone and paver patios common in this area. With dry high altitude air and big freeze thaw swings between the October and May frost dates, a properly bedded and jointed installation matters more here than in milder climates. It's not a mulch or a soil amendment, it's a build material for structure.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand I'd buy at a hardware store?

Yes, this is washed and finely screened mason sand, the same fine uniform grade used for mortar mixing and paver joints. It's finer and more consistent than concrete sand, which is what makes it workable for mortar and tight enough to pack into paver joints without leaving gaps.

Answer

How many cubic yards do I need for a paver patio in Centennial?

For joint filling, one cubic yard covers about 324 square feet at a 1 inch depth, but most joint work uses far less material than that per square foot of patio since you're only filling gaps, not covering the whole surface. Measure your patio's total joint area and estimate from there, or round up slightly to avoid running short.

Answer

What time of year should I schedule sand delivery for a hardscape project?

Spring through fall is the typical hardscape season here, with most patio and wall projects running between the May and October frost dates. Working outside that window means colder mortar cure times and a shorter workday due to less daylight, so most crews plan around the frost free stretch.

Answer

Where will the sand be dropped on my property?

The delivery truck places the load in your driveway or the nearest accessible spot, so make sure there's a clear path wide enough for the truck and no low hanging branches or parked cars blocking the way. If you want the pile on a tarp or plywood to protect your driveway surface, have that down before the truck arrives.

Answer

Should I use sand or chip stone for my paver joints?

Sand has been the traditional choice for paver joints, but many crews are shifting to clean chip stone since it locks in place and doesn't pump out during freeze thaw cycles the way sand can. Mason sand is still the right choice for mortar mixing and pool base work, so it depends on which part of your project you're tackling.

More delivery around Centennial, Colorado

All Centennial, Colorado landscape supply