We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How Much Sand Do I Need?
How Much Sand Do I Need?
At a 1 to 2 inch install depth, one cubic yard covers roughly 324 square feet at the thinner end of that range, so a typical patio joint or bedding job runs somewhere between a quarter yard and a full yard depending on square footage. For mortar mixing, figure your batch ratios first and order a bit extra since running short mid pour is worse than having leftover sand. Weight matters too, this sand runs about 1.35 tons per cubic yard, so keep that in mind for driveway or lawn access.
What is a Yard?
What is a Yard?
FAQs
FAQs
Council Bluffs Sand Delivery
Council Bluffs Sand Delivery
Regular price
$74.00
per
Yard
Regular price
Sale price
$74.00
Unit price
per
Shipping calculated at checkout.
Minimum of 3 Yard
Couldn't load pickup availability
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound
The best local sand, without the guesswork.
We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.
Mulch Mound Guarantee
If your sand isn't the quantity or quality you ordered, we'll make it right.
About this sand
Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!
How Much Sand Do I Need?
How Much Sand Do I Need?
At a 1 to 2 inch install depth, one cubic yard covers roughly 324 square feet at the thinner end of that range, so a typical patio joint or bedding job runs somewhere between a quarter yard and a full yard depending on square footage. For mortar mixing, figure your batch ratios first and order a bit extra since running short mid pour is worse than having leftover sand. Weight matters too, this sand runs about 1.35 tons per cubic yard, so keep that in mind for driveway or lawn access.
What is a Yard?
What is a Yard?
FAQs
FAQs
Tell us what you're looking for
Thanks! We received your request.
Something went wrong. Please try again.
How It Works
Getting started is easy — just follow these simple steps
1
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
2
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
3
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...
Read full review
First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.
Complete Your Outdoor Project
Most jobs pairing this sand also need paver base or crushed rock underneath it for a stable foundation, especially given the silt loam base soil common around Council Bluffs. If you are mixing mortar, cement is the obvious companion. Some crews are shifting bedding duty over to clean chip stone instead of sand since it will not pump out from under pavers over time, worth asking about if that is your application.
Service area
Areas we deliver sand in Council Bluffs, Iowa
Mulch Mound Pro Tip
Do not confuse this with concrete sand when jointing pavers, the finer, more uniform grain here is what lets it settle tightly into narrow joints without bridging or leaving gaps. That same fineness is why it works for mortar, coarser sand makes a gritty, less workable mix. If your joints keep washing out after rain, it is often the wrong sand grade, not a drainage problem.
Mulch Mound Pro Tip
A common mistake locally is bedding pavers straight on top of silt loam without a proper base course underneath the sand. Silt loam holds moisture and shifts with our freeze thaw swings, so pavers set only on sand over native soil tend to heave by the second winter. Always compact a crushed stone base first, then use sand as the leveling layer on top, not as your only foundation.
Mulch Mound Pro Tip
If your project is purely paver bedding rather than joints or mortar, ask about clean chip stone instead. It is increasingly used in place of sand for bedding because it will not pump out from under pavers under load, while mason sand still makes sense for joint filling and mortar mixing where its fine texture matters most. Mixing the two correctly on one job can save a callback later.
Working With Sand in Council Bluffs
Council Bluffs sits on silt loam, which drains fine on its own but is not what you want under a mortar mix or in a paver joint where you need something uniform and stable. This sand fills that gap for hardscape work, jointing pavers around patios along the bluffs, or mixing mortar for retaining walls and steps. With freeze thaw cycles running from mid October to late April, joints and bedding need to be packed right the first time or they heave. Most of the demand here follows the same spring through fall hardscape season as the rest of the region.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.