About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs in this area call for 6 to 12 inches depending on how low the ground is. Measure the low area in square feet, decide your target depth, and order by the cubic yard rather than guessing with bags, since a pallet of bagged dirt won't move a real grade problem.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Covington Fill Dirt Delivery

Covington Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most jobs in this area call for 6 to 12 inches depending on how low the ground is. Measure the low area in square feet, decide your target depth, and order by the cubic yard rather than guessing with bags, since a pallet of bagged dirt won't move a real grade problem.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Covington Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs around here finish with a few inches of topsoil capped on top wherever grass or plants need to grow, since fill dirt itself is not meant to support root growth. If the area drains poorly to begin with, a layer of gravel or crushed stone underneath can help before you fill. Mulch or sod comes last, once the grade is set and stable.

Mulch Mound Pro Tip

Covington's silt loam compacts differently than sandy soil, it holds together well but traps water if you skip compaction between lifts. Place fill in 6 to 8 inch layers and compact each one before adding the next, ideally with a plate compactor rather than just foot traffic or a lawn roller. Skipping this step is the number one reason yards here develop a sunken spot two winters later, right where the fill was dumped and never packed.

Mulch Mound Pro Tip

A common mistake is treating fill dirt like topsoil and planting straight into it. It has no organic matter and compacts too hard for roots to push through easily. Cap any area that needs grass, shrubs, or beds with 4 to 6 inches of real topsoil after the fill has settled and been compacted, and give it at least a few weeks before planting so the base has time to stabilize under its own weight.

Mulch Mound Pro Tip

If you are filling a large low area near the Bogue Falaya or any spot that holds water after rain, consider a bit of crushed stone or gravel as a base layer before the fill dirt, it helps water move through instead of pooling under the new grade. Ordering the full volume in one delivery is usually more efficient than several smaller loads, since each truck trip adds cost regardless of yardage.

Grading and Filling in Covington

Silt loam holds moisture longer than sandy soil, and at 26 feet of elevation a lot of Covington properties sit close to the water table, especially near the Bogue Falaya. That combination means standing water in low corners of the yard after a hard rain, and it means fill dirt has to be compacted properly or it settles right back into a puddle spot. This material is used to raise those low areas, level ground before a slab or shed, and backfill around foundations where the original soil has washed out. It is not a growing medium, it is the structural base that goes down before topsoil.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No. Fill dirt is subsoil, screened of debris but without the organic matter that topsoil has. It is a structural material for raising or leveling ground, not for growing anything. Most projects cap fill dirt with a layer of topsoil once the grade is set, especially if grass or plants are going in on top.

Answer

How many cubic yards do I need to raise a 200 square foot low spot?

At a 6 inch depth, 200 square feet needs a little under 4 cubic yards, since one yard covers about 54 square feet at that depth. If you are filling deeper, say 12 inches, plan for closer to 7.5 yards. Add a bit extra for compaction settling.

Answer

Can I fill and grade in one day or do I need to wait between layers?

For anything under about 6 inches you can often place and compact in one pass, but deeper fills should go down in 6 to 8 inch lifts, compacting each layer before adding the next. Rushing a deep fill in one shot is exactly how you end up with a sunken spot a year or two later, especially in our silt loam soil.

Answer

Can the truck get the dirt close to my backyard or low spot?

The truck places the load as close as your driveway or access point allows, but it cannot drive across lawns or through tight gates. For backyard low spots you will likely need to move the dirt from the drop point with a wheelbarrow, so plan your access path before delivery day.

Answer

Should I get fill dirt or a sand and dirt mix for backfilling around my pool?

Straight fill dirt works fine for most pool backfill if you compact it in lifts, but some installers prefer a sandier mix near pool walls because it compacts more evenly and drains a bit better. If your project calls for a specific mix, check with your pool contractor before ordering, otherwise standard fill dirt handles most backfill jobs.

More delivery around Covington, Louisiana

All Covington, Louisiana landscape supply