• Cranston RI Sand Delivery - Mulch Mound
  • Cranston RI Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, and this material is typically installed at 1 to 2 inches depending on the job, so a paver joint project might only need a fraction of a yard while a pool base could use several. Since it weighs about 1.35 tons per cubic yard, larger orders add up fast in weight, which matters if you are having it placed on a driveway or sloped yard. Measure your project area first, then match it against depth to land on a yard count instead of guessing.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Cranston Sand Delivery

Cranston Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Ryan Cully
Ryan Cully
Google Review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I c...

One cubic yard covers about 324 square feet at a 1 inch depth, and this material is typically installed at 1 to 2 inches depending on the job, so a paver joint project might only need a fraction of a yard while a pool base could use several. Since it weighs about 1.35 tons per cubic yard, larger orders add up fast in weight, which matters if you are having it placed on a driveway or sloped yard. Measure your project area first, then match it against depth to land on a yard count instead of guessing.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Cranston Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review
Lindsay Mangan
Lindsay Mangan

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...

Read full review

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

Google Review

Complete Your Outdoor Project

On most Cranston jobs this sand shows up alongside pavers, edging stone, or bagged cement for mortar mixing. If you are setting a pool base, a layer of crushed stone underneath is common before the sand goes down. For paver work, some installers are shifting to clean chip stone for the joint fill since it resists washout better than sand under heavy rain.

Cranston Soil Delivery
Cranston Mulch Delivery
Mulch Mound Pro Tip

Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar and not for structural fill. If you are mixing mortar in Cranston during the cooler shoulder months, keep your mix slightly wetter than you would in July since evaporation is slower and stiff mortar sets awkwardly on masonry joints when the air is cool and damp.

Mulch Mound Pro Tip

A common mistake is using this sand as paver bedding and expecting it to stay put. Fine sand pumps and washes out under freeze thaw cycles, which Cranston sees plenty of between the October and April frost dates. If you are setting pavers for the long haul, ask about chip stone bedding instead and save the sand for joints and mortar work.

Mulch Mound Pro Tip

If your project needs both mortar sand and a base material, order them together for one delivery instead of two separate trips, since the driver can drop both loads in the same visit if you have room for two piles. This works especially well for pool installations where you need base material down low and finer sand up top.

Working With Sand in Cranston

Cranston sits on sandy loam already, so this material is not fighting the native ground, it is supplementing a specific task like mortar mixing or setting a pool base rather than amending garden soil. With a growing season that runs frost to frost from mid April to late October, most hardscape and masonry work here happens in that window when the ground is workable and mortar cures properly. People building patios or walkways near older Cranston neighborhoods often pair it with pavers, and its fine, uniform grain is exactly what makes mortar workable rather than stiff.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this is washed and finely screened natural sand, the same product commonly called mason sand in other regions. It is finer and more uniform than concrete sand, which is what makes it workable for mixing mortar and filling paver joints rather than structural fill work.

Answer

How many yards do I need for a small patio project?

One cubic yard covers about 324 square feet at a 1 inch depth. For paver joints you are using a fraction of that depth, so a typical patio project usually needs well under a full yard, while a pool base at 2 inches would use roughly double the coverage rate per yard.

Answer

When is the best time to install this in Cranston?

Most hardscape and masonry work happens between mid April and late October here, matching the frost free window. Mortar cures poorly in freezing temperatures, so anything involving mortar mixing should wrap up before the October frost sets in for the season.

Answer

Where will the sand be dropped on delivery day?

The driver places the load wherever you direct on your property, typically a driveway or the edge of the work area. Clear the space beforehand and note that a full yard weighs about 1.35 tons, so pavement handles it better than soft lawn.

Answer

Should I use sand or chip stone under my pavers?

Sand has traditionally been used for paver bedding, but many installers are shifting to clean chip stone since it does not pump or wash out the way fine sand can under repeated freeze thaw cycles. Sand still works well for joint filling between pavers, just not always as the base layer.

More delivery around Cranston, Rhode Island

All Cranston, Rhode Island landscape supply