Ordered Dirt. Received Dirt. Would Buy Again.

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will de...
Read full review
Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of cautio...
Read full review
Placing an order online was so easy. Delivery was on time. When the driver realized we had a newly poured driveway they erred on the side of caution and opted not ti drive in it. The company even sent me a message explaining that call. Would recommend!
Complete Your Outdoor Project
Most fill jobs finish with a few inches of topsoil capping the fill dirt, especially if grass or beds are going in after. If the project involves a low spot that stays wet, a layer of gravel underneath can help with drainage before the fill goes on top. Either way, the fill does the structural work and the topsoil handles anything expected to grow.
Service area
Areas we deliver fill dirt in Culpeper, Virginia
Culpeper's red clay subsoil doesn't forgive shortcuts. Dump fill dirt in one thick pile and it will look fine for a season, then settle unevenly as it compacts under its own weight and rain works through it. Place it in 6 to 8 inch lifts, compacting each one with a plate compactor or even repeated passes with a lawn roller, before adding the next layer. It's slower, but it's the difference between a stable pad and a soft spot that reappears every spring.
The most common mistake we see is skipping the topsoil cap. Fill dirt is subsoil, stripped of the organic matter that lets grass, shrubs, or garden beds actually take root. If anything is going to grow on top, plan for at least 4 to 6 inches of real topsoil over the compacted fill. Skip it and you'll be fighting bare patches and poor drainage for years, especially with Culpeper's clay-heavy native soil underneath.
If you're filling a large low area, consider pairing fill dirt with a coarser base material like crushed stone at the bottom, especially in spots that collect water after storms. This gives the water somewhere to go instead of sitting against your fill and softening it from below. It costs a little more upfront but saves you from redoing the grading work in a year or two once the ground has had time to settle and shift.
Grading and Filling in Culpeper
Culpeper's red clay compacts hard but drains poorly, so low areas near foundations and old outbuildings tend to hold water long after a storm. Fill dirt lets you raise that grade before you ever bring in topsoil or plant anything. It's common here for pool decks, driveway aprons, and the low corners near Culpeper National Cemetery's older neighborhoods where lots were graded unevenly decades ago. Because it's a structural material, not a growing medium, it does the heavy lifting while topsoil handles anything that has to grow on top.
What Clean Fill Is
Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.
Fill Dirt vs Topsoil
Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.
Compact in Lifts
Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.