About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 54 square feet at a 6 inch depth, and most fill projects run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and size the order from there rather than guessing. For anything over a few yards, delivery by the cubic yard is a lot more practical than bags.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Dalton Fill Dirt Delivery

Dalton Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers about 54 square feet at a 6 inch depth, and most fill projects run 6 to 12 inches deep depending on how much grade you need to make up. Measure the low area in square feet, decide your target depth, and size the order from there rather than guessing. For anything over a few yards, delivery by the cubic yard is a lot more practical than bags.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Dalton Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a topsoil cap on top, especially if grass or beds are going in over the fill. If the area sees runoff from Dalton's clay-heavy ground nearby, a layer of gravel at the base before filling can help with drainage. Straw or erosion matting is worth having on hand if the graded area will sit exposed before it's seeded.

Map of the fill dirt delivery area around Dalton, Georgia

Service area

Areas we deliver fill dirt in Dalton, Georgia

Mulch Mound Pro Tip

Fill dirt is a structural material, not something you spread and walk away from. Place it in 6 to 8 inch lifts and compact each layer before adding the next, especially in Dalton where the native red clay already holds water and adds pressure over time. Skipping compaction is the number one reason people end up with sunken spots near foundations or walkways a year or two later.

Mulch Mound Pro Tip

A common mistake is filling a low spot and seeding straight into it. Fill dirt has no nutrients or structure for roots, so cap it with several inches of topsoil before planting anything. This matters more here since Dalton's clay subsoil is already tight, and skipping the cap layer just gives grass another dense layer to fight through.

Mulch Mound Pro Tip

If you're filling a large low area, consider a mixed approach, coarse fill for the bulk of the depth and a topsoil cap only where you need growth. This uses less of the more expensive material for volume that doesn't need to support plants, and it pairs naturally with a gravel base if the spot has drainage issues from Dalton's clay soil.

Grading and Filling in Dalton

Dalton sits on red clay that already drains slowly, so when a yard has a low spot, water tends to sit there instead of moving through. Fill dirt gives you a structural base to bring that grade up before anything else goes on top. With an elevation around 761 feet and plenty of rolling ground in and around town, backfill work near foundations, pools, and additions is common here. Cap it with topsoil where you actually want grass or plants to take, since fill dirt itself is not a growing medium.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Is fill dirt the same as topsoil?

No. Fill dirt is subsoil screened of debris, meant to raise grade and provide structural base, not to grow anything in. Topsoil has organic content and is meant for planting. Most projects here use fill dirt to build up the level, then cap it with a few inches of topsoil where grass or beds are going in.

Answer

How many cubic yards do I need to fill a low spot in my yard?

One cubic yard covers about 54 square feet at a 6 inch depth. Measure your low area in square feet, decide how deep you need to fill, usually 6 to 12 inches, and use that to size your order. It's better to round up slightly than come up short mid project.

Answer

Can I fill and seed the same weekend?

Not if you want it to last. Fill dirt needs to be placed in lifts and compacted, and it should be capped with topsoil before seeding. Rushing straight to seed on bare fill usually means poor root growth and settling later, especially with Dalton's clay based ground underneath adding to compaction issues.

Answer

Where will the truck put the fill dirt on delivery day?

The load gets dropped as close to your project area as the truck can safely and legally access, usually the driveway or a clear spot near the work zone. Delivery is scheduled at checkout, and it helps to clear a path ahead of time since fill dirt is heavy and isn't moved by hand once it's off the truck.

Answer

Should I use fill dirt or gravel for backfilling around my foundation?

Fill dirt works for most backfill jobs where you're just building up grade, but gravel drains better if water pooling near the foundation is a concern, which comes up often with Dalton's slow draining red clay. Some jobs use a gravel base layer with fill dirt on top for a balance of drainage and cost.

More delivery around Dalton, Georgia

All Dalton, Georgia landscape supply