• Easton PA Sand Delivery - Mulch Mound
  • Easton PA Sand Delivery - Mulch Mound
1 2
Sand - Mulch Mound
Sand - Mulch Mound

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers roughly 324 square feet at a 1 inch depth, and most paver bedding or mortar mixing jobs in this region call for 1 to 2 inches. For a typical 200 square foot patio at 1.5 inches, plan on a little over 1 cubic yard, and round up rather than down since running short mid pour costs more time than a partial extra yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Easton Sand Delivery

Easton Sand Delivery

4.7
137 reviews
$74.00 per Yard
$74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.
Nicole Sheehe
Nicole Sheehe
Google Review

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

One cubic yard covers roughly 324 square feet at a 1 inch depth, and most paver bedding or mortar mixing jobs in this region call for 1 to 2 inches. For a typical 200 square foot patio at 1.5 inches, plan on a little over 1 cubic yard, and round up rather than down since running short mid pour costs more time than a partial extra yard.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Easton Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review
Ryan Cully
Ryan Cully

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wan...

Read full review

First time going with this company for mulch and it was an efficient process from start to finish. Website was easy—I told them exactly where I wanted the mulch put on my driveway, and it was delivered perfectly when I got home from work the next day. Best deal around when I compared it to competitors and I will definitely be becoming back.

Google Review

Complete Your Outdoor Project

Most paver jobs around Easton pair this sand with a crushed stone base course underneath for drainage and stability, especially given the clay loam subsoil common in the area. If you are mixing mortar for a stone wall or brick repair near Centre Square's older buildings, you will also want cement and lime on hand before the sand arrives. For pool bases, a layer of coarse gravel below the sand helps keep things level once ground moisture works its way up.

Easton Soil Delivery
Easton Mulch Delivery
Map of the sand delivery area around Easton, Pennsylvania

Service area

Areas we deliver sand in Easton, Pennsylvania

See All Locations
Mulch Mound Pro Tip

For paver joints, dampen the sand slightly before sweeping it in, dry sand alone tends to bounce back out during compaction with a plate tamper. In this climate, joints packed loose in fall can wash out before the ground fully freezes, so give yourself a dry stretch of a few days after installing before heavy rain is expected, especially with Easton's variable spring and fall weather.

Mulch Mound Pro Tip

A common mistake on clay loam sites is skipping the compacted gravel base and laying pavers straight onto sand over native soil. It looks fine the first season, but the clay loam here holds water and moves with freeze thaw cycles, so unsupported sand beds tend to settle unevenly by the second winter. Always compact a proper base first and treat the sand layer as the fine leveling step, not the structural one.

Mulch Mound Pro Tip

If your project only needs mortar mixing, you likely do not need a full cubic yard, so check if a smaller order or half load fits before committing to more material than the job requires. Many local setters are also shifting paver bedding to clean chip stone instead of sand, since it does not pump moisture up through joints the way sand can, worth asking your contractor which one your design actually calls for.

Working With Sand in Easton

Easton sits on clay loam that drains slowly and holds moisture longer than sandy soils, which is exactly why sand plays a specific role here rather than a general one. It is not a soil amendment for these yards, it is a construction material, used to bed pavers, mix mortar for the stone and brick work common around the older parts of the city, and set pool bases where a stable, non organic layer matters. With clay loam underneath, contractors here often set a compacted gravel base first and use this sand only as the fine leveling layer on top, since sand alone over clay loam can still shift with the freeze thaw cycle we get before that mid April last frost.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

Is this the same as mason sand?

Yes, this washed and finely screened sand is what people in some regions call mason sand. It is finer and more uniform than concrete sand, which is what makes it workable for mortar mixing and gives it a smoother finish for paver joints.

Answer

How much sand do I need for a 300 square foot patio?

At a 1 inch depth, one cubic yard covers about 324 square feet, so a 300 square foot patio at 1 inch needs just under a full yard. If you are going with a 2 inch bedding depth instead, plan closer to 2 cubic yards to be safe.

Answer

What time of year should I schedule this delivery in Easton?

Hardscape projects here run heaviest from spring through fall, once the ground has firmed up after the last frost around April 20 and before the first frost in mid October. Ordering outside that window works fine too, but give yourself extra buffer days if rain or an early cold snap is in the forecast.

Answer

Where will the truck place the sand on delivery day?

The load goes wherever you direct at checkout, typically a driveway or curbside spot with clear truck access. Since sand runs 1.35 tons per cubic yard, make sure the surface can handle the weight, and clear the area of vehicles or obstacles beforehand.

Answer

Should I use this sand or chip stone for paver bedding?

Many contractors are shifting away from sand for paver bedding toward clean chip stone, since chip stone does not pump moisture up through the joints over time the way sand can. Sand still works well for mortar mixing and pool bases, so the right choice depends on which part of your project you are working on.

More delivery around Easton, Pennsylvania

All Easton, Pennsylvania landscape supply