About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of mason sand covers roughly 324 square feet at a 1 inch depth, and most bedding or jointing work only needs 1 to 2 inches. For mortar mixing you are working by volume in a mixer rather than covering ground, so order based on your mix ratio and expected batches rather than square footage. Either way, ordering by the cubic yard lets you scale up for a full patio or dock project without guessing on bags.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Elizabeth City Sand Delivery

Elizabeth City Sand Delivery

4.7
137 reviews
Regular price $74.00 per Yard
Regular price Sale price $74.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Minimum of 3 Yard
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local sand, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your sand isn't the quantity or quality you ordered, we'll make it right.

About this sand

Washed and finely screened masonry sand for mortar, paver joints, and pool bases. Consistent grain, ready to screed.

Easy to order, great service, and great product. We enjoy the final look of a very neglected beds we inherited!

One cubic yard of mason sand covers roughly 324 square feet at a 1 inch depth, and most bedding or jointing work only needs 1 to 2 inches. For mortar mixing you are working by volume in a mixer rather than covering ground, so order based on your mix ratio and expected batches rather than square footage. Either way, ordering by the cubic yard lets you scale up for a full patio or dock project without guessing on bags.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Elizabeth City Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Mason sand pairs naturally with paver base stone, brick, and block for most masonry jobs around Elizabeth City, and with landscape fabric if you are using it under a paver patio. If you are working near the water, a lot of customers order it alongside crushed stone for dock or bulkhead footing work. It is worth having both on site before your mason or crew starts, since running short mid job slows everything down.

Mulch Mound Pro Tip

Mason sand compacts tighter than most people expect, so if you are bedding pavers, screed to 1 inch rather than the 2 inches you might use with coarser bedding sand. Too much depth and joints shift under foot traffic. If you are near the water table here, which sits close to the surface given our 12 foot elevation, keep drainage in mind and avoid trapping water under the bedding layer.

Mulch Mound Pro Tip

A common mistake is ordering mason sand for paver joints when chip stone would hold up better long term, since mason sand can wash out of joints during heavy rain, which we get plenty of spring through fall. It still works fine for mortar and pool base work where it is contained, just think twice before using it as your only jointing material on an exposed patio.

Mulch Mound Pro Tip

If your project needs both mortar sand and a base material, order them together to save a delivery trip, since our trucks can usually carry a mixed load. Masons around town often keep leftover sand covered and dry between phases of a job, since damp clumped sand throws off mortar ratios and wastes material you already paid to have delivered.

Working With Sand in Elizabeth City

Elizabeth City sits low, just 12 feet of elevation, and the native sandy loam already drains fast, so mason sand fits right into that pattern for bedding and jointing work near the harbor. With frost not showing up until around November 9 and clearing out by late April, the working season here runs long, which is good news for masonry and hardscape crews. A lot of the sand we deliver locally goes into mortar for brick and block work, since older homes around town see regular repointing. It also shows up under pool decks and around dock footings where a stable, well drained base matters.

Masonry vs Fill Sand

Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.

Bedding and Leveling

For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.

Working With Moisture

Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.

Frequently Asked Questions

Click a question to see the answer

Answer

What is mason sand actually used for around Elizabeth City?

It is mainly used for mortar mixing in brick and block work, paver joints, and pool base layers. Around here it shows up a lot in dock and bulkhead footing work too, since the fine, uniform grain gives masons a workable, consistent mix compared to coarser construction sand.

Answer

How many cubic yards do I need for a patio or walkway?

One cubic yard covers about 324 square feet at a 1 inch depth, which is typical for paver bedding. Measure your square footage, divide by 324, and round up. For mortar mixing, base your order on expected batches rather than area, since you are working by volume in a mixer.

Answer

When is the best time to schedule a hardscape or masonry project here?

Spring through fall is peak season locally, running roughly from late April once frost clears through early November before the first frost hits. That gives a long working window, but scheduling earlier in the season avoids the rush that builds up as fall approaches.

Answer

Where will the sand be placed when it is delivered?

You choose the drop location at checkout, typically a driveway or a spot close to your work area. Make sure the area is clear and accessible for a delivery truck beforehand, and have a tarp ready if rain is in the forecast, which is common here.

Answer

Should I use mason sand or chip stone for paver joints?

Mason sand works fine but can wash out of joints over time, especially with our regular rain. Many crews are switching to clean chip stone for paver joints since it locks in place and does not pump out. Mason sand is still the right call for mortar mixing and pool base work.

More delivery around Elizabeth City, North Carolina

All Elizabeth City, North Carolina landscape supply