Very happy with the ease of ordering. Delivery went exactly as planned. Garden soil looks great and couldn’t be happier.

How It Works
Getting started is easy — just follow these simple steps
Choose your quantity
Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.
Select your delivery date
Select a delivery date you'd like for the product to be dropped off at your home
Sit back and wait
Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.
The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a ni...
Read full review
The website to order is super easy to use. Pick a mulch, date/time/driveway location of the delivery and that’s it. A few days later there was a nice mound of mulch in my driveway. Great service - just as promised.
This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will b...
Read full review
This was the easiest process to purchase mulch! It arrived on time and the driver did an amazing job putting it exactly where I wanted it. I will be a return customer for sure.
Complete Your Outdoor Project
Mason sand pairs naturally with paver base stone and edge restraints on any patio or walkway job, and with type S or N mortar mix if you are setting a retaining wall or veneer. If you are leaning toward chip stone instead of sand for paver joints, we can deliver both so you can compare on site before committing.
Mason sand is finer and more uniform than concrete sand, which is exactly why it works for mortar, coarser grains make mortar stiff and hard to spread evenly on a trowel. If you are mixing on site in Findlay's spring or fall shoulder seasons, keep the sand covered between uses since a surprise rain shower on silt loam ground can turn a dry pile muddy fast.
A common mistake with paver joints is over filling then sweeping excess into the joints without compacting first, which leaves voids that settle after a few freeze thaw cycles. Findlay's frost depth means unsettled joints show up as uneven pavers by the following spring. Sweep sand in, then run a plate compactor over the surface, then top off and compact again before calling the job done.
If your project is small, like a single mortar batch or a short run of paver joints, you may not need a full yard, so measure first rather than ordering round numbers out of habit. For larger paver bedding jobs, ask about chip stone as an alternative, it does not pump or wash out the way sand can under Ohio's freeze thaw swings, and pairs well if you are already ordering base stone for the same job.
Working With Sand in Findlay
Findlay sits on silt loam, which drains fine on its own but is not the reason you need sand, this is a hardscape material not a soil amendment here. Most calls we get are for mortar batches on patio and retaining wall projects, or for filling joints between pavers around Riverside Park style backyard patios. With winters bringing real frost down to depths that heave unstabilized bases, a properly bedded paver joint matters more here than in milder climates. Some contractors still spec it for paver bedding, but a lot are shifting to chip stone since sand joints can wash out or pump under freeze thaw cycles.
Masonry vs Fill Sand
Masonry sand is washed and finely screened, the right choice for mortar work, paver joints, and sandboxes. Fill sand is coarser and less processed, better suited to leveling, bedding pipe, and filling low spots.
Bedding and Leveling
For pavers, screed a 1 inch sand bed over a compacted base rather than using sand to fix deep grade problems. A thin, even bed locks pavers in place. A thick one shifts underfoot.
Working With Moisture
Slightly damp sand spreads, screeds, and compacts far more easily than bone dry sand, which just flows back into your screed lines. Lightly wetting the pile before you work it saves real effort.