• Gary IN Fill Dirt Delivery - Mulch Mound
1 1
Gary Fill Dirt Delivery

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches depending on how much elevation you need to gain. Measure the low area in square feet, decide your target depth, and order in cubic yards from there, rounding up rather than down since running short mid-project means a second delivery. For backfill around a foundation or pool wall, measure the void by length, width, and depth instead of treating it like an open area fill.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

Gary Fill Dirt Delivery

Gary Fill Dirt Delivery

4.7
137 reviews
$38.00 per Yard
$38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.
Rich Riley
Rich Riley
Google Review

Highest compliments. Great driver.
Website is easy to navigate. Just a seamless process. 5 stars!!

One cubic yard of fill dirt covers about 54 square feet at a 6 inch depth, and most structural fill jobs run 6 to 12 inches depending on how much elevation you need to gain. Measure the low area in square feet, decide your target depth, and order in cubic yards from there, rounding up rather than down since running short mid-project means a second delivery. For backfill around a foundation or pool wall, measure the void by length, width, and depth instead of treating it like an open area fill.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

FAQs

Read all FAQs

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Gary Folks

4.7
out of 5 based on 137 reviews
Google Reviews
Hannah
Hannah

I needed 3 yards of top soil and that's what I got! Right on time and right where I asked it to be placed (Order# 2041).

Google Review
Nicole Sheehe
Nicole Sheehe

We had a great experience with mulch mound! Our mulch arrived when we requested. The delivery fee was so reasonable. We’ll use them again for sure!

Google Review

Complete Your Outdoor Project

Most fill dirt jobs finish with a topsoil cap since fill dirt is not a growing medium, so if grass or planting beds go on top, plan on ordering topsoil for the final few inches. Compactable base material or gravel is worth pairing in if the project involves a shed pad or patio subbase. For pool backfill or foundation work, some customers also grab sand for the layer closest to the structure.

Gary Soil Delivery
Gary Mulch Delivery
Map of the fill dirt delivery area around Gary, Indiana

Service area

Areas we deliver fill dirt in Gary, Indiana

See All Locations
Mulch Mound Pro Tip

With Gary's sandy loam base, fill dirt compacts faster than it would on heavier clay soil, but that also means it can settle unevenly if you skip compaction between lifts. Place it in 6 to 8 inch layers and tamp each one before adding the next, especially near foundations or pool walls where uneven settling later means real repair work. Skipping this step is the number one reason fill jobs need redone within a year or two.

Mulch Mound Pro Tip

A common mistake is treating fill dirt as a finished surface. It is subsoil, screened of debris but with no organic matter, so nothing grows well in it long term. Always cap the final few inches with real topsoil before seeding or sodding, and do that capping after the fill has had a chance to settle and been compacted, not before.

Mulch Mound Pro Tip

If you are filling a large low spot and also need topsoil for the top layer, ordering both in the same delivery window can save a separate trip charge and gets the whole project staged at once. Keep the fill dirt pile separate from the topsoil pile on site so you are not mixing subsoil into your growing layer by accident.

Grading and Filling in Gary

Gary sits at 607 feet with sandy loam soil that drains well but can leave low spots and settled areas near foundations, especially on older lots around Steel City where decades of settling and past industrial grading left uneven ground. Fill dirt is what people here use to correct that before anything else happens, whether it is leveling a yard for sod or building a pad for a shed. Because the native soil is sandy, fill dirt compacts differently here than it would on a clay-heavy lot, it needs attention in lifts rather than one big dump. This is structural work, not planting work, so plan on capping with topsoil once the grade is set.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I use fill dirt to level my whole backyard in Gary?

Yes, fill dirt is the right material for raising low areas and leveling grade, especially on sandy loam lots common around Gary where drainage is fine but elevation is uneven. Just remember it needs to be capped with topsoil if grass or plants are going on top, since fill dirt itself has no nutrients for growing.

Answer

How many cubic yards do I need to fill a 200 square foot low spot?

At a 6 inch depth, one cubic yard covers about 54 square feet, so a 200 square foot area needs roughly 4 cubic yards. If you are going deeper, say 12 inches, you would need close to 8 cubic yards. Order a bit extra since compaction during installation reduces your finished volume.

Answer

Do I need to compact fill dirt before building on it?

Yes, compaction matters a lot, especially in Gary's sandy loam where uneven settling is common if it is skipped. Place fill in 6 to 8 inch lifts and compact each layer before adding more, rather than dumping it all in one pass. Skipping this step is the main reason fill areas sink or shift within a season or two after the work is done.

Answer

Can the delivery truck access a tight residential lot?

In most cases yes, but access depends on your driveway width and any low branches or narrow gates on the property. Let us know at checkout where you want the load placed, and make sure the path is clear of vehicles or obstacles on delivery day so the driver can place it directly where you need it.

Answer

Should I get fill dirt or topsoil for my project?

It depends on the goal. Fill dirt is for raising elevation, backfilling, or building a structural base, it has no organic content and is not meant for growing. Topsoil goes on top of fill dirt as the final layer where grass, plants, or gardens need to establish. Most grading projects in Gary use both, fill dirt for the bulk and topsoil to finish.

More delivery around Gary, Indiana

All Gary, Indiana landscape supply