About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

At a 6 inch install depth, one cubic yard covers roughly 54 square feet, so a 300 square foot low spot at that depth runs a little under 6 yards. Go to 12 inches and you cut coverage roughly in half, so plan on closer to 11 to 12 yards for the same footprint. Measure the area and the depth you actually need to raise it, not just the finished grade, since some of that depth may already exist.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

Greenlawn Fill Dirt Delivery

Greenlawn Fill Dirt Delivery

4.7
137 reviews
Regular price $38.00 per Yard
Regular price Sale price $38.00
Sale Sold out
Shipping calculated at checkout.
Type
Size
Hand-picked local yards
4,000+ regional deliveries
Dedicated support
Why order through Mulch Mound

The best local fill dirt, without the guesswork.

We hand-pick and partner with the best yards in your region, keep only the ones our buyers rate well, and back each load with our guarantee.

Mulch Mound Guarantee

If your fill dirt isn't the quantity or quality you ordered, we'll make it right.

About this fill dirt

Screened fill dirt free of debris, for raising low ground and backfilling. Structural material, place it in lifts and compact as you go.

Wonderful experience! They put the mulch exactly where we wanted. This mulch spread very easily and didn’t have the usual “mulch smell.” We will definitely use again!

At a 6 inch install depth, one cubic yard covers roughly 54 square feet, so a 300 square foot low spot at that depth runs a little under 6 yards. Go to 12 inches and you cut coverage roughly in half, so plan on closer to 11 to 12 yards for the same footprint. Measure the area and the depth you actually need to raise it, not just the finished grade, since some of that depth may already exist.

A yard is approximately 27 cubic feet. As a general guideline, one yard of material can cover an area of about 100-160 square feet at a 2-3 inch depth.

View full details

How It Works

Getting started is easy — just follow these simple steps

1

Choose your quantity

Adjust the quantity to match your project. One cubic yard covers about 100 to 160 square feet at a 2 to 3 inch depth.

2

Select your delivery date

Select a delivery date you'd like for the product to be dropped off at your home

3

Sit back and wait

Sit back, wait, and let us work our magic to make sure the highest quality product is delivered to your driveway.

From The Mouths of Greenlawn Folks

4.7
out of 5 based on 137 reviews
Google Reviews

Complete Your Outdoor Project

Most fill jobs finish with a topsoil cap since fill dirt itself won't support planting or turf. If you're bringing a low yard up to grade before sod or seed, order topsoil for the top few inches and fill dirt for the bulk underneath. Some Greenlawn jobs near pools or foundations also pair fill with crushed stone for drainage at the base before the fill goes in.

Mulch Mound Pro Tip

Never dump fill dirt in one deep pour and call it done. Place it in 6 to 8 inch lifts and compact each layer before adding the next, especially over Greenlawn's sandy loam base which already shifts. Skipping this step is the number one reason people call back a year later asking why their yard sank near the foundation or pool wall. A hand tamper works for small areas, a plate compactor for anything larger.

Mulch Mound Pro Tip

Fill dirt is not a growing medium and treating it like one is a common mistake. It has no organic matter and compacts differently than topsoil, so plants struggle or the surface stays too hard for roots. Always cap finished fill with 4 to 6 inches of real topsoil before seeding or sodding, and keep that layer loose rather than compacted like the fill below it.

Mulch Mound Pro Tip

Order slightly more than your calculated volume, especially on a first fill job, since compaction always reduces final volume by a noticeable margin. Combining a fill delivery with a topsoil delivery on the same schedule often makes more sense than doing the cap weeks later, since your grading equipment and access path are already set up.

Grading and Filling in Greenlawn

Greenlawn sits on sandy loam that drains fast but also settles and shifts more than a heavier clay soil would, especially on properties near the old farmland flats around John Gardiner Farm. Low areas that pond after a Long Island nor'easter usually need real structural fill, not just a few bags of topsoil dumped on top. Because the native soil here is sandy and loose already, compaction of the fill itself matters even more, otherwise you end up chasing settling for a couple seasons. This material is built for that grading and backfill work, not for planting straight into.

What Clean Fill Is

Clean fill is screened subsoil free of debris, roots, and contaminants. It is made for volume and grade, and it compacts predictably, which is exactly what you want under slabs, in trenches, and behind walls.

Fill Dirt vs Topsoil

Fill dirt builds the shape of the ground, topsoil grows things on top of it. Bring the grade up with fill, then cap it with 4 to 6 inches of topsoil anywhere grass or plants are going in.

Compact in Lifts

Place fill in layers of 4 to 6 inches and compact each one before adding the next. Dumping the full depth at once leaves voids that settle later, and settling is the one problem fill is supposed to solve.

Frequently Asked Questions

Click a question to see the answer

Answer

Can I plant grass or a garden directly in fill dirt?

No, fill dirt is a structural material meant to raise grade or backfill, not a growing medium. It has no organic matter and compacts too hard for root growth. Cap it with 4 to 6 inches of topsoil before seeding, sodding, or planting anything on top.

Answer

How many yards do I need to raise a low spot in my yard?

One cubic yard covers about 54 square feet at a 6 inch depth. For a 200 square foot area at 6 inches you need roughly 4 yards, and at 12 inches roughly 7 to 8 yards. Measure your actual low spot depth first, since it may vary across the area.

Answer

Do I need to compact the fill dirt myself after delivery?

Yes, compaction is on the customer or contractor side after delivery. Spread and compact in 6 to 8 inch lifts rather than one deep layer, or the ground will keep settling unevenly for a year or more, which is a common issue in Greenlawn's sandy loam soil.

Answer

Where will the truck place the fill dirt on delivery day?

The driver places the load where you direct them on site, typically the driveway or the nearest flat, accessible spot to your work area. Clear space roughly a truck's width wide beforehand and let us know about any tight gates or low branches when scheduling.

Answer

Should I order fill dirt or topsoil for my project?

Fill dirt is for bulk volume, raising grade, and backfill where nothing needs to grow yet. Topsoil is for the top layer where grass, plants, or gardens go in. Most grading jobs in Greenlawn use both, fill dirt for the base and a topsoil cap on top.

More delivery around Greenlawn, New York

All Greenlawn, New York landscape supply